label_contents
label_links
logo_jlps
Archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol.3, No.3 (December, 2008)


01
Microdrilling in Steel with Frequency-doubled Ultrashort Pulsed Laser Radiation [DOI: 10.2961/jlmn.2008.03.0001]
Martin Kraus, FGSW Forschungsgesellschaft für Strahlwerkzeuge mbH; Stephan Collmer, FGSW Forschungsgesellschaft für Strahlwerkzeuge mbH; Steffen Sommer, FGSW Forschungsgesellschaft für Strahlwerkzeuge mbH; Friedrich Dausinger, FGSW Forschungsgesellschaft für Strahlwerkzeuge mbH;
(pp.129 - 134) Received: May 23, 2007, Accepted: April 30, 2008
pdfr


02
Laser Dicing of Silicon:Comparison of Ablation Mechanisms with a Novel Technology of Thermally Induced Stress [DOI: 10.2961/jlmn.2008.03.0002]
Oliver Haupt, Laser Zentrum Hannover e.V. ; Frank Siegel, Laser Zentrum Hannover e.V. ; Aart Schoonderbeek, Laser Zentrum Hannover e.V. ; Lars Richter, Laser Zentrum Hannover e.V. ; Rainer Kling, Laser Zentrum Hannover e.V. ; Andreas Ostendorf, Laser Zentrum Hannover e.V. ;
(pp.135 - 140) Received: June 16, 2008, Accepted: October 1, 2008
pdfr


03
Generation of Photonic Crystal End Faces Using Laser Microfabrication [DOI: 10.2961/jlmn.2008.03.0003]
Thorsten Schweizer, Laser Zentrum Hannover e.V.; André Neumeister, Laser Zentrum Hannover e.V.; Qingchuan Guo, Laser Zentrum Hannover e.V.; Wendel Wohlleben, BASF Aktiengesellschaft; Reinhold J. Leyrer, BASF Aktiengesellschaft; Rainer Kling, Laser Zentrum Hannover e.V.; Andreas Ostendorf, Laser Zentrum Hannover e.V.;
(pp.141 - 146) Received: June 16, 2008, Accepted: October 28, 2008
pdfr


04
Fabrication of Gold Nanoparticles by Pulsed Laser Ablation in Aqueous Media [DOI: 10.2961/jlmn.2008.03.0004]
Donfang Yang, Industrial Materials Institute, National Research Council Canada; Seongkuk Lee, Industrial Materials Institute, National Research Council Canada; Bo Chen, Industrial Materials Institute, National Research Council Canada; Suwas Nikumb, Industrial Materials Institute, National Research Council Canada;
(pp.147 - 151) Received: July 1, 2008, Accepted: October 28, 2008
pdfr


05
Plasmonic Metamaterials Produced by Two-photon-induced Photoreduction Technique [DOI: 10.2961/jlmn.2008.03.0005]
Takuo Tanaka, RIKEN( The Institute of Physical and Chemical Research), Metamaterials Laboratory;
(pp.152 - 156) Received: July 8, 2008, Accepted: October 30, 2008
pdfr


06
Micromachining with a High Repetition Rate Femtosecond Fiber Laser [DOI: 10.2961/jlmn.2008.03.0006]
Fumiyo Yoshino, IMRA America, Inc., Applications Research Laboratory; Lawrence Shah, IMRA America, Inc.; Martin Fermann, IMRA America, Inc.; Alan Arai, IMRA America, Inc., Applications Research Laboratory; Yuzuru Uehara, IMRA America, Inc.;
(pp.157 - 162) Received: June 16, 2008, Accepted: November 12, 2008
pdfr


07
Digital Microfabrication by Laser Decal Transfer [DOI: 10.2961/jlmn.2008.03.0007]
Alberlto Piqué, Naval Research Laboratory, Materials Science and Technology Division; Raymond C. Y. Auyeung, Naval Research Laboratory, Materials Science and Technology Division; Heungsoo Kim, Naval Research Laboratory, Materials Science and Technology Division; Kristin M. Metkus, Naval Research Laboratory, Materials Science and Technology Division; Scott A. Mathews, Naval Research Laboratory, Materials Science and Technology Division;
(pp.163 - 169) Received: July 11, 2008, Accepted: November 12, 2008
pdfr


08
Deposition of Thin Films Composed of Fe81B13.5 Si3.5Co2 Material by PLD Method Using the ArF Excimer Laser [DOI: 10.2961/jlmn.2008.03.0008]
Waldemar Mróz, Military University of Technology, Institute of Optoelectronics; Artur Prokopiuk, Military University of Technology, Institute of Optoelectronics; Michael L. Korwin-pawlowski, Université du Québec en Outaouais, Département d’informatique et d’ingénierie; Sylwia Burdynska, Military University of Technology, Institute of Optoelectronics;
(pp.170 - 174) Received: June 16, 2008, Accepted: November 25, 2008
pdfr


09
Fabrication of Moulds and Dies Using Precision Laser Micromachining and Micromilling Technologies [DOI: 10.2961/jlmn.2008.03.0009]
Evgueni Bordatchev, Industrial Materials Institute National Research Council of Canada ; Suwas Nikumb, Industrial Materials Institute National Research Council of Canada ;
(pp.175 - 181) Received: June 16, 2008, Accepted: November 25, 2008
pdfr


10
Surface Microstructuring of Inclined Trench Structures of Silica Glass by Laser-induced Backside Wet Etching [DOI: 10.2961/jlmn.2008.03.0010]
Hiroyuki Niino, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Yoshizo Kawaguchi, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Tadatake Sato, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Aiko Narazaki, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Ryozo Kurosaki, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.182 - 185) Received: July 8, 2008, Accepted: December 1, 2008
pdfr


11
Miniaturized Samples for Bond Strength and Hermetic Sealing Evaluation for Transmission Laser Joints [DOI: 10.2961/jlmn.2008.03.0011]
Golam Newaz, Department of Mechanical Engineering; Taslema Sultana, Institute for Manufacturing Research, Wayne State University; Saied Nusier, Department of Mechanical Engineering; Hans J. Herfurth, Fraunhofer Center for Laser Technology;
(pp.186 - 195) Received: April 10, 2008, Accepted: September 3, 2008
pdfr


12
Imaging Diagnostics of Debris from Laser-Produced Tin Plasma with Droplet Target for EUV Light Source [DOI: 10.2961/jlmn.2008.03.0012]
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University; Tomoya Akiyama, Graduate School of Information Science and Electrical Engineering, Kyushu University; Akihito Takahashi, Graduate School of Medical Sciences, Kyushu University; Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
(pp.196 - 200) Received: June 16, 2008, Accepted: October 28, 2008
pdfr


13
Local Laser Oxidation of Thin Metal Films: Ultra-resolution in Theory and in Practice [DOI: 10.2961/jlmn.2008.03.0013]
V. P. Veyko, Saint-Petersburg state technical university of information technologies, mechanics and optics; E. A. Shakhno, Saint-Petersburg state technical university of information technologies, mechanics and optics; A. G. Poleshchuk, Institute of automatics and electrometry, Novosibirsk; V. P. Korolkov, Institute of automatics and electrometry, Novosibirsk; V. Matyzhonok, Saint-Petersburg state technical university of information technologies, mechanics and optics;
(pp.201 - 205) Received: July 9, 2008, Accepted: December 3, 2008
pdfr


14
On the Origin, Growth and Application of Ripples [DOI: 10.2961/jlmn.2008.03.0014]
Bert Huis in ’t Veld, University of Twente, Faculty of Engineering Technology, Applied Laser Technology; Max Groenendijk, Lightmotif; Hartmut Fischer, TNO Science and Industry, Department Materials Technology;
(pp.206 - 210) Received: July 1, 2008, Accepted: December 9, 2008
pdfr


15
Melt Dynamics and Hole Formation during Drilling with Ultrashort Pulses [DOI: 10.2961/jlmn.2008.03.0015]
Andreas Michalowski, Institut für Strahlwerkzeuge (IFSW),Universität Stuttgart; Dmitrij Walter, Forschungsgesellschaft für Strahlwerkzeuge mbH (FGSW); Friedrich Dausinger, Institut für Strahlwerkzeuge (IFSW),Universität Stuttgart; Thomas Graf, Institut für Strahlwerkzeuge (IFSW),Universität Stuttgart;
(pp.211 - 215) Received: May 12, 2007, Accepted: March 24, 2008
pdfr



↑page top
Copyright ©2020 Japan Laser Processing Society

CONTENTS

LINKS