label_contents
label_links
logo_jlps
Archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol.9, No.1 (March, 2014)


01
Simultaneous Multi-Bit Recording and Driveless Reading for Permanent Storage in Fused Silica [DOI: 10.2961/jlmn.2014.01.0001]
Manabu Shiozawa, Central Research Laboratory, Hitachi, Ltd.; Takao Watanabe, Central Research Laboratory, Hitachi, Ltd.; Ryo Imai, Central Research Laboratory, Hitachi, Ltd.; Mariko Umeda, Central Research Laboratory, Hitachi, Ltd.; Toshiyuki Mine, Central Research Laboratory, Hitachi, Ltd.; Yasuhiko Shimotsuma, Department of Material Chemistry, Kyoto University; Masaaki Sakakura, Society-Academia Collaboration for Innovation, Kyoto University; Kiyotaka Miura, Department of Material Chemistry, Kyoto University; Koichi Watanabe, Central Research Laboratory, Hitachi, Ltd.;
(pp.1 - 4) Received: August 1, 2013, Accepted: December 13, 2013
pdfr


02
High-Speed Laser Printing of Silver Nanoparticles Ink [DOI: 10.2961/jlmn.2014.01.0002]
Ludovic Rapp, Aix-Marseille University; Emeric Biver, Aix-Marseille University; Anne Patricia Alloncle, Aix-Marseille University; Philippe Delaporte, Aix-Marseille University;
(pp.5 - 9) Received: July 22, 2013, Accepted: December 14, 2014
pdfr


03
On-Demand Deposition of Functional Oxide Microdots by Double-Pulse Laser-Induced Dot Transfer [DOI: 10.2961/jlmn.2014.01.0003]
Aiko Narazaki, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST); Ryozo Kurosaki, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST); Tadatake Sato, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST); Yoshizo Kawaguchi, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST); Hiroyuki Niino, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST);
(pp.10 - 14) Received: July 22, 2013, Accepted: December 14, 2014
pdfr


04
Modulation of Crack Generation inside a LiF Single Crystal by Interference of Laser Induced Stress Waves [DOI: 10.2961/jlmn.2014.01.0004]
M. Sakakura, Hitachi Zosen Collaborative Research Division, Office of Society-Academia Collaboration for In-novation, Kyoto University; Y. Ishiguro, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; N. Fukuda, Hitachi Zosen Collaborative Research Division, Office of Society-Academia Collaboration for In-novation, Kyoto University; Y. Shimotsuma, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; K. Miura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
(pp.15 - 18) Received: July 22, 2013, Accepted: December 15, 2013
pdfr


05
Formation of Periodic Micro/nano-holes Array in Boro-aluminosilicate Glass by Single-pulse Femtosecond Laser Machining [DOI: 10.2961/jlmn.2014.01.0005]
Md. Shamim Ahsan, Electronics and Communication Engineering Discipline, School of Science, Engineering and Technology, Khulna University; Yoon-Young Kwon, R&D Center, Samsung Corning Precision Materials; Ik-Bu Sohn, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST); Young-Chul Noh, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST); Man Seop Lee, Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST);
(pp.19 - 24) Received: July 15, 2013, Accepted: December 24, 2013
pdfr


06
Direct Laser Fabrication of Composite Material 3D Microstructured Scaffolds [DOI: 10.2961/jlmn.2014.01.0006]
Sima Rekštyte, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University; Egle Kaziulionyte, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University; Evaldas Balciunas, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University; Dalia Kaškelyte, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University; Mangirdas Malinauskas, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University;
(pp.25 - 30) Received: July 23, 2013, Accepted: December 26, 2013
pdfr


07
Femtosecond-laser Nanostructuring in Glass [DOI: 10.2961/jlmn.2014.01.0007]
Yasuhiko Shimotsuma , Department of Material Chemistry, Kyoto University; Taiga Asai, Department of Material Chemistry, Kyoto University; Masaaki Sakakura, Office of Society-Academia Collaboration for Innovation, Kyoto University; Kiyotaka Miura, Department of Material Chemistry, Kyoto University;
(pp.31 - 36) Received: July 19, 2013, Accepted: December 28, 2013
pdfr


08
Fast Micromachining Using Spatial Light Modulator and Galvanometer Scanner with Infrared Pulsed Nanosecond Fiber Laser [DOI: 10.2961/jlmn.2014.01.0008]
Jarno J.J. Kaakkunen, VTT Technical Research Centre of Finland; Ilkka Vanttaja , VTT Technical Research Centre of Finland; Petri Laakso, VTT Technical Research Centre of Finland;
(pp.37 - 41) Received: June 28, 2013, Accepted: December 30, 2013
pdfr


09
Realization of Structural Color by Direct Laser Write Technique in Photoresist [DOI: 10.2961/jlmn.2014.01.0009]
Vygantas Mizeikis, Research Institute of Electronics, Shizuoka University; Vytautas Purlys, Laser Research Center, Department of Quantum Electronics, Vilnius University ; Ričardas Buividas, Centre for Micro-Photonics, Swinburne University of Technology; Saulius Juodkazis, Centre for Micro-Photonics, Swinburne University of Technology;
(pp.42 - 45) Received: August 2, 2013, Accepted: January 15, 2014
pdfr


10
Self Repeating Surface Morphology on Ultrashort Laser Pulse-Treated Vanadium Surface [DOI: 10.2961/jlmn.2014.01.0010]
Miklós Füle, Department of General and Environmental Physics, University of Szeged; Judit Budai, Department of Optics and Quantum Electronics, University of Szeged; Zsolt Szkiva, High Intensity Laser Laboratory, Department of Experimental Physics, University of Szeged; Koji Sugioka, Laser Technology Laboratory, RIKEN; László Nánai, Department of General and Environmental Physics, University of Szeged;
(pp.46 - 51) Received: August 19, 2013, Accepted: January 15, 2014
pdfr


11
Formation of Internal Modified Line with High Aspect Ratio in Sapphire by Sub-nanosecond Pulsed Fiber Laser [DOI: 10.2961/jlmn.2014.01.0011]
Yasuhiro Okamoto, Graduate School of Natural Science and Technology, Okayama University; Tomohiro Takekuni, Graduate School of Natural Science and Technology, Okayama University; Akira Okada, Graduate School of Natural Science and Technology, Okayama University;
(pp.52 - 58) Received: August 30, 2013, Accepted: January 26, 2014
pdfr


12
Laser Ablation of Carbon Fiber Reinforced Plastics: Laser-Ionization TOF Mass Spectrometric Study [DOI: 10.2961/jlmn.2014.01.0012]
Aiko Narazaki, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST); Tadatake Sato, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST); Yoshizo Kawaguchi, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST); Hiroyuki Niino, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Indus-trial Science and Technology (AIST);
(pp.59 - 63) Received: July 18, 2013, Accepted: February 3, 2014
pdfr


13
Laser Surface Modification for Rapid Oxide Layer Formation on Ti-6Al-4V [DOI: 10.2961/jlmn.2014.01.0013]
T. F. Hong, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology; K. P. Chi, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology; H. K. Lin, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology; Y. D. Wu, Metal Industries Research & Development Centre;
(pp.64 - 67) Received: August 19, 2013, Accepted: February 13, 2014
pdfr


14
Improvement of the Fabrication Accuracy of Fiber Tip Microoptical Components via Mode Field Expansion [DOI: 10.2961/jlmn.2014.01.0014]
Albertas Žukauskas, Department of Quantum Electronics, Vilnius University; Vasileia Melissinaki, Institute of Electronic Structure and Laser, Foundation of Research and Technology Hellas; Dalia Kaškelyte, Department of Quantum Electronics, Vilnius University; Maria Farsari, Institute of Electronic Structure and Laser, Foundation of Research and Technology Hellas; Mangirdas Malinauskas, Department of Quantum Electronics, Vilnius University;
(pp.68 - 72) Received: July 22, 2013, Accepted: February 19, 2014
pdfr


15
Through Hole Forming Method Using a Flowable Backing Material During Pulse UV Laser Radiation [DOI: 10.2961/jlmn.2014.01.0015]
Susumu Nakamura, Department of Electrical and Electronic Systems Engineering, Nagaoka National College of Technology; Kaoru Itagaki, Itagaki Kinzoku Co., Ltd.; Naohiko Soma, Wavelock Advanced Technology Co., Ltd.;
(pp.73 - 78) Received: July 19, 2013, Accepted: February 28, 2014
pdfr


16
(Technical Communication) Experimental and Theoretical Investigation of CO2 Laser Drilling of Fused Silica [DOI: 10.2961/jlmn.2014.01.0016]
Barada K. Nayak, Science and Technology, Corning Incorporated; Ravindra Akarapu, Science and Technology, Corning Incorporated; Joel P. Carberry , Science and Technology, Corning Incorporated; Anping Liu, Science and Technology, Corning Incorporated;
(pp.79 - 82) Received: September 25, 2013, Accepted: January 4, 2014
pdfr



↑page top
Copyright ©2020 Japan Laser Processing Society

CONTENTS

LINKS