|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.11, No.1 (February, 2016) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
The Development of a Long-Stroke Precision Positioning Stage for Micro Fabrication by Two-Photon Polymerization [DOI: 10.2961/jlmn.2016.01.0001]
|
|
|
Fu-Cheng Wang , Department of Mechanical Engineering, National Taiwan University;
Yi-Yi Chen, Department of Mechanical Engineering, National Taiwan University;
Kuo-An Wang, Department of Mechanical Engineering, National Taiwan University;
Tien-Tung Chung, Department of Mechanical Engineering, National Taiwan University;
|
|
|
(pp.1
-
12)
Received: October 7, 2015,
Accepted: December 10, 2015
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Frequency Modulation and Device Repaired by Laser Surface Treatment in Film Bulk Acoustic Filters [DOI: 10.2961/jlmn.2016.01.0002]
|
|
|
C.C. Cheng, Department of Electronic Engineering, De Lin Institute of Technology;
R.C. Lin, Electronics and Optoelectronics Research Laboratories, Industrial Technology Research Institute;
H.K. Lin, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology;
K.S. Kao, Department of Computer and Communication, Shu-Te University;
Y.C. Chen, Department of Electrical Engineering, National Sun Yat-Sen University;
|
|
|
(pp.13
-
16)
Received: May 21, 2015,
Accepted: January 4, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
A Preventive Measure against Fiber Damage of a Femtosecond 1.55-µm Er-doped Fiber Laser System using Multimode Optical Fiber [DOI: 10.2961/jlmn.2016.01.0003]
|
|
|
Toru Mizunami , Department of Electrical Engineering and Electronics, Graduate School of Engineering, Kyushu Institute of Technology;
Junpei Takahashi , Department of Electrical Engineering and Electronics, Graduate School of Engineering, Kyushu Institute of Technology;
|
|
|
(pp.17
-
20)
Received: May 23, 2015,
Accepted: January 4, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Effects of Deposition Pressure and Target-Substrate Distance on Growth of ZnO by Femtosecond Pulsed Laser Deposition [DOI: 10.2961/jlmn.2016.01.0004]
|
|
|
Joseph A. De Mesa, Photonics Research Laboratory, National Institute of Physics, University of the Philippines ;
Annaliza M. Amo, Photonics Research Laboratory, National Institute of Physics, University of the Philippines ;
Jessa Jayne C. Miranda, Photonics Research Laboratory, National Institute of Physics, University of the Philippines ;
Hernanie O. Salazar, Condensed Matter Physics Laboratory – Superconductor, National Institute of Physics;
Roland V. Sarmago, Condensed Matter Physics Laboratory – Superconductor, National Institute of Physics;
Wilson O. Garcia , Photonics Research Laboratory, National Institute of Physics, University of the Philippines ;
|
|
|
(pp.21
-
24)
Received: May 26, 2015,
Accepted: January 4, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Investigation of Thermochemical Reaction of Metallic Grooves Manufactured with Laser Micromachining in Liquid [DOI: 10.2961/jlmn.2016.01.0005]
|
|
|
Kwang H. Oh, Laser Advanced System Industrialization Center, Jeonnam Technopark Stiftung;
S. Z. Lee, Laser Advanced System Industrialization Center, Jeonnam Technopark Stiftung;
S. H. Jeong, Department of Mechatronics, Gwangju Institute of Science and Technology;
|
|
|
(pp.25
-
29)
Received: May 18, 2015,
Accepted: January 5, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Optical Glass Substrates Forming Processes Using Pulsed UltravioletLaser Micromilling Technology [DOI: 10.2961/jlmn.2016.01.0006]
|
|
|
Wen-Tse Hsiao, Instrument Technology Research Center, National Applied Research Laboratories;
Chih-Chung Yang, Instrument Technology Research Center, National Applied Research Laboratories;
Kuo-Cheng Huang, Instrument Technology Research Center, National Applied Research Laboratories;
Chien-Kai Chung, Instrument Technology Research Center, National Applied Research Laboratories;
Shih-Feng Tseng, Instrument Technology Research Center, National Applied Research Laboratories;
Donyau Chiang, Instrument Technology Research Center, National Applied Research Laboratories;
Ming-Fei Chen, Department of Mechatronics Engineering, National Changhua University of Education;
|
|
|
(pp.30
-
34)
Received: May 14, 2015,
Accepted: January 5, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Nanostructuring in Indirect Band-gap Semiconductor Using IR Femtosecond Double Pulses [DOI: 10.2961/jlmn.2016.01.0007]
|
|
|
Yasuhiko Shimotsuma, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Tomoaki Sei, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Masaaki Sakakura, Society-Academia Collaboration for Innovation, Kyoto University;
Kiyotaka Miura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Haruhiko Udono, College of Engineering, Ibaraki University;
|
|
|
(pp.35
-
40)
Received: May 22, 2015,
Accepted: January 14, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Mask assisted Laser Percussion Drilling [DOI: 10.2961/jlmn.2016.01.0008]
|
|
|
C.-C. Ho, Department of Mechanical Engineering, National Taipei University of Technology;
Y.-H. Luo, Department of Mechanical Engineering, National Yunlin University of Science and Technology;
Y.-J. Chang, Department of Mechanical Engineering, National Yunlin University of Science and Technology;
J.-C. Hsu, Department of Mechanical Engineering, National Yunlin University of Science and Technology;
C.-L. Kuo, Department of Mechanical Engineering, National Yunlin University of Science and Technology;
|
|
|
(pp.41
-
45)
Received: June 10, 2015,
Accepted: January 17, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Micro Scribing of Copper and Aluminum Thin Films in Air and Water Using Pulsed Nd³+:YAG Laser [DOI: 10.2961/jlmn.2016.01.0009]
|
|
|
Srinagalakshmi Nammi , Department of Engineering Design, Indian Institute of Technology Madras;
Ankit K Jain, Department of Engineering Design, Indian Institute of Technology Madras;
Nilesh J Vasa, Department of Engineering Design, Indian Institute of Technology Madras;
G Balaganesan, Department of Mechanical Engineering, Indian Institute of Madras;
Anil C Mathur, Scientist, Antenna Mechanical Design Division, Indian Space Research Organization;
|
|
|
(pp.46
-
52)
Received: May 26, 2015,
Accepted: January 17, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Internal to External Microfluidic Device for Ellipsometric Biosensor Application [DOI: 10.2961/jlmn.2016.01.0010]
|
|
|
Valdemar Stankevič, Center for Physical Sciences and Technology;
Tomas Rakickas, Center for Physical Sciences and Technology;
Gediminas Račiukaitis, Center for Physical Sciences and Technology;
|
|
|
(pp.53
-
58)
Received: June 12, 2015,
Accepted: January 17, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Femtosecond Laser Processing of Polymethyl Methacrylate with an Axicon [DOI: 10.2961/jlmn.2016.01.0011]
|
|
|
Yu Matushiro, Department of Electrical & Electronic Engineering, College of Science and Engineering, Ritsumeikan University;
Wataru Watanabe, Department of Electrical & Electronic Engineering, College of Science and Engineering, Ritsumeikan University;
|
|
|
(pp.59
-
65)
Received: May 21, 2015,
Accepted: January 18, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Ultrashort Pulse Laser Cutting of Glass by Controlled Fracture Propagation [DOI: 10.2961/jlmn.2016.01.0012]
|
|
|
Konstantin Mishchik, Univ. Bordeaux CNRS CEA, CELIA UMR5107, 351 Cours de la Libération;
Clémentine Javaux Leger, ALPhANOV;
Ophélie Dematteo Caulier, Univ. Bordeaux CNRS CEA, CELIA UMR5107, 351 Cours de la Libération;
Stefan Skupin , Univ. Bordeaux CNRS CEA, CELIA UMR5107, 351 Cours de la Libération;
Benoit Chimier, Univ. Bordeaux CNRS CEA, CELIA UMR5107, 351 Cours de la Libération;
Clemens Hönninger, Amplitude Systèmes;
Rainer Kling, ALPhANOV;
Guillaume Duchateau, Univ. Bordeaux CNRS CEA, CELIA UMR5107, 351 Cours de la Libération;
John Lopez, Univ. Bordeaux CNRS CEA, CELIA UMR5107, 351 Cours de la Libération;
|
|
|
(pp.66
-
70)
Received: May 27, 2015,
Accepted: January 18, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
SiC Thin Film Growth on Different Substrates using Pulsed Nd³+:YAG Laser Deposition [DOI: 10.2961/jlmn.2016.01.0013]
|
|
|
Emmanuel Paneerselvam, Department of Engineering Design, Indian Institute of Technology Madras;
Nilesh J Vasa, Department of Engineering Design, Indian Institute of Technology Madras;
M S Ramachandra Rao, Department of physics, Indian Institute of Technology Madras;
|
|
|
(pp.71
-
75)
Received: May 23, 2015,
Accepted: January 22, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Self-assembled Nanostructures inside Indirect Bandgap Semiconductor by Using IR Femtosecond Double-pulses [DOI: 10.2961/jlmn.2016.01.0014]
|
|
|
T. Sei, Department of Material Chemistry Graduate School of Engineering, Kyoto University;
Y. Shimotsuma, Department of Material Chemistry Graduate School of Engineering, Kyoto University;
M. Sakakura, Society-Academia Collaboration for Innovation, Kyoto University;
K. Miura, Department of Material Chemistry Graduate School of Engineering, Kyoto University;
|
|
|
(pp.76
-
80)
Received: May 25, 2015,
Accepted: January 23, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
Micromachining of Transparent, Semiconducting and Metallic Substrates Using Femtosecond Laser Beams [DOI: 10.2961/jlmn.2016.01.0015]
|
|
|
Simas Butkus, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Aleksandr Alesenkov, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Domas Paipulas, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Tomas Baipulas, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Dalia Kaškelytė, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Martynas Barkauskas, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Valdas Sirutkaitis, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
|
|
|
(pp.81
-
86)
Received: August 12, 2015,
Accepted: January 23, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
Nanogratings Embedded in Al2O3-Dy2O3 Glass by Femtosecond Laser Irradiation [DOI: 10.2961/jlmn.2016.01.0016]
|
|
|
Satoshi Mori, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Torataro Kurita, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Yasuhiko Shimotsuma, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Masaaki Sakakura, Office of Society-Academia Collaboration for Innovation, Kyoto University;
Kiyotaka Miura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
|
|
|
(pp.87
-
90)
Received: May 25, 2015,
Accepted: January 24, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
The Shape of The Exfoliated Surface during Femtosecond Laser Ablation [DOI: 10.2961/jlmn.2016.01.0017]
|
|
|
Naoya Kakimoto, Faculty of Engineering, Tokushima University;
Takashi Eyama, Faculty of Engineering, Tokushima University;
Rui Izutsu, Faculty of Engineering, Tokushima University;
Takuro Tomita, Faculty of Engineering, Tokushima University;
|
|
|
(pp.91
-
94)
Received: May 22, 2015,
Accepted: January 26, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
Control of Periodic Nanostructure Embedded in SiO2 Glass under Femtosecond Double-Pulse Irradiation [DOI: 10.2961/jlmn.2016.01.0018]
|
|
|
Atsushi Murata, Department of Material Chemistry, Graduate School of Engineering, Kyoto University ;
Yasuhiko Shimotsuma, Department of Material Chemistry, Graduate School of Engineering, Kyoto University ;
Masaaki Sakakura, Society-Academia Collaboration for Innovation, Kyoto University;
Kiyotaka Miura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University ;
|
|
|
(pp.95
-
99)
Received: May 25, 2015,
Accepted: January 26, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19
|
|
Minimizing the Surface Roughness for Silicon Ablation with Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2016.01.0019]
|
|
|
Matthias Domke, Josef Ressel Center for material processing with ultrashort pulsed lasers, University of Applied Sciences Vorarlberg;
Giovanni Piredda, Josef Ressel Center for material processing with ultrashort pulsed lasers, University of Applied Sciences Vorarlberg;
Johann Zehetner, Josef Ressel Center for material processing with ultrashort pulsed lasers, University of Applied Sciences Vorarlberg;
Sandra Stroj, Josef Ressel Center for material processing with ultrashort pulsed lasers, University of Applied Sciences Vorarlberg;
|
|
|
(pp.100
-
103)
Received: May 20, 2015,
Accepted: January 26, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20
|
|
Laser Cutting of Carbon Fiber Reinforced Plastics (CFRP and CFRTP) by IR Fiber Laser Irradiation [DOI: 10.2961/jlmn.2016.01.0020]
|
|
|
Hiroyuki Niino, Advanced Laser and Process Technology Research Association (ALPROT);
Yoshihisa Harada, Advanced Laser and Process Technology Research Association (ALPROT);
Kenji Anzai, Advanced Laser and Process Technology Research Association (ALPROT);
Masafumi Matsushita, Advanced Laser and Process Technology Research Association (ALPROT);
Koichi Furukawa, Advanced Laser and Process Technology Research Association (ALPROT);
Michiteru Nishino, Advanced Laser and Process Technology Research Association (ALPROT);
Akira Fujisaki, Advanced Laser and Process Technology Research Association (ALPROT);
Taizo Miyato, Advanced Laser and Process Technology Research Association (ALPROT);
|
|
|
(pp.104
-
110)
Received: July 2, 2015,
Accepted: January 29, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21
|
|
High Temperature Laser Based Drop on Demand Micro Joining of Thin Metallic Layers or Foils using Bronze Braze Preforms [DOI: 10.2961/jlmn.2016.01.0021]
|
|
|
Stefan Stein, Bayerisches Laserzentrum GmbH (blz);
Johannes Heberle, Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg;
Michael Suchy, Bayerisches Laserzentrum GmbH (blz);
Felix Tenner, Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg;
Florian Hugger, Bayerisches Laserzentrum GmbH (blz);
Stephan Roth, Bayerisches Laserzentrum GmbH (blz);
Michael Schmidt, Bayerisches Laserzentrum GmbH (blz);
|
|
|
(pp.111
-
116)
Received: May 22, 2015,
Accepted: February 2, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22
|
|
High-Quality Surface Micromachining on Polymer Using Visible-LIBWE [DOI: 10.2961/jlmn.2016.01.0022]
|
|
|
Ji-Yen Cheng, Research Center for Applied Sciences, Academia Sinica;
Wei-Chen Kao, Research Center for Applied Sciences, Academia Sinica;
Mansoureh Z. Mousavi, Research Center for Applied Sciences, Academia Sinica;
Hui-Fang Chang , Research Center for Applied Sciences, Academia Sinica;
Wen-Chi Hsu, Research Center for Applied Sciences, Academia Sinica;
Meng-Hua Yen , Research Center for Applied Sciences, Academia Sinica;
Martin Ehrhardt, Leibniz-Institut für Oberflächenmodifizierung e.V. Permoserstraße 15;
Klaus Zimmer, Leibniz-Institut für Oberflächenmodifizierung e.V. Permoserstraße 15;
|
|
|
(pp.117
-
123)
Received: May 24, 2015,
Accepted: February 2, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
23
|
|
Innovative Strategies for the Removal of Organic Compounds in Nanoparticle ITO Layers [DOI: 10.2961/jlmn.2016.01.0023]
|
|
|
Florian Mikschl, Institute of Photonic Technologies (LPT), Friedrich-Alexander Universität Erlangen-Nürnberg;
Marcus Baum, Institute of Photonic Technologies (LPT), Friedrich-Alexander Universität Erlangen-Nürnberg;
Michael Schmidt, Institute of Photonic Technologies (LPT), Friedrich-Alexander Universität Erlangen-Nürnberg;
|
|
|
(pp.124
-
129)
Received: May 24, 2015,
Accepted: February 4, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24
|
|
Femtosecond Laser Scribing of Cu(In,Ga)Se2 Thin-Film Solar Cell [DOI: 10.2961/jlmn.2016.01.0024]
|
|
|
Aiko Narazaki , Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
Ryozo Kurosaki, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
Tadatake Sato, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
Hiroyuki Niino, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
Hideyuki Takada, Electronics and Photonics Research Institute, AIST;
Kenji Toriduka, Electronics and Photonics Research Institute, AIST;
Jiro Nishinaga, Research Center for Photovoltaics, AIST;
Yukiko Kamikawa-Shimizu, Research Center for Photovoltaics, AIST;
Shogo Ishizuka, Research Center for Photovoltaics, AIST;
Hajime Shibata, Research Center for Photovoltaics, AIST;
Shigeru Niki, Renewable Energy Research Center, AIST;
|
|
|
(pp.130
-
136)
Received: June 11, 2015,
Accepted: February 4, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
25
|
|
Influence of Polishing Orientation on the Generation of LIPSS on Stainless Steel [DOI: 10.2961/jlmn.2016.01.0025]
|
|
|
Florian Preusch, University of Applied Sciences Aschaffenburg;
Stefan Rung, University of Applied Sciences Aschaffenburg;
Ralf Hellmann, University of Applied Sciences Aschaffenburg;
|
|
|
(pp.137
-
142)
Received: May 26, 2015,
Accepted: February 22, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
