|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.11, No.3 (October, 2016) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
Laser Direct Writing and Photonic Manufacturing of Microball Lens for Wide-angle Imaging, Energy Devices, and Sensors on Flexible Substrates [DOI: 10.2961/jlmn.2016.03.0001]
|
|
|
Shutong Wang , College of Electronics and Information Engineering, Sichuan University;
Ruozhou Li, Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee;
Chong Zheng, Institute of Laser Engineering, Beijing University of Technology;
Cheng Cheng, Department of Electrical Engineering and Computer Science, The University of Tennessee, Knoxville;
Yongchao Yu, Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee;
Shi Bai, Institute of Laser Engineering, Beijing University of Technology;
Guoying Feng, College of Electronics and Information Engineering, Sichuan University;
Anming Hu, Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee;
|
|
|
(pp.285
-
289)
Received: May 23, 2016,
Accepted: August 1, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Study of Generating Sub-Diffraction-Limit Patterns with the Phase Modulation of Polarized Beams [DOI: 10.2961/jlmn.2016.03.0002]
|
|
|
Chen Zhang, Institute of Photonics & Photon-Technology, Northwest University;
Hongfu Li , Kunming Institute of Physics;
Shuang Wang, Institute of Photonics & Photon-Technology, Northwest University;
Wei Zhao, Institute of Photonics & Photon-Technology, Northwest University;
Xiaoqiang Feng, Institute of Photonics & Photon-Technology, Northwest University;
Kaige Wang, Institute of Photonics & Photon-Technology, Northwest University;
Guiren Wang, Mechanical Engineering Department & Biomedical Engineering Program, University of South Carolina;
Jintao Bai, Institute of Photonics & Photon-Technology, Northwest University;
|
|
|
(pp.290
-
295)
Received: May 26, 2016,
Accepted: August 1, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Analysis and Evaluation of Boundary Conditions for Direct Surface Structuring by Multi-Beam Interference [DOI: 10.2961/jlmn.2016.03.0003]
|
|
|
Michael Steger, Chair for Laser Technology, RWTH Aachen University;
Arnold Gillner, Chair for Laser Technology, RWTH Aachen University;
|
|
|
(pp.296
-
303)
Received: May 26, 2015,
Accepted: August 1, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Influence of Polarization State on Ultrafast Laser-Induced Bulk Nanostructuring [DOI: 10.2961/jlmn.2016.03.0004]
|
|
|
Anton Rudenko, Univ Lyon, UJM Saint-Etienne, Laboratoire Hubert Curien;
Jean-Philippe Colombier, Univ Lyon, UJM Saint-Etienne, Laboratoire Hubert Curien;
Tatiana E. Itina, Univ Lyon, UJM Saint-Etienne, Laboratoire Hubert Curien;
|
|
|
(pp.304
-
311)
Received: May 19, 2016,
Accepted: August 9, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Simple Synthesis of Ag Nanoparticles Arranged in 1D and 2D Grating-like Structures [DOI: 10.2961/jlmn.2016.03.0005]
|
|
|
Giorgio Baraldi, Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ;
Stephanie Reynaud, Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ;
Anthony Cazier, , Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ;
Yaya Lefkir, , Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ;
Nicolas Crespo-Monteiro, , Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ;
Francis Vocanson, Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ;
Nathalie Destouches, Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ;
|
|
|
(pp.312
-
316)
Received: May 24, 2016,
Accepted: August 14, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Direct Fabrication of Submicron-size Periodic Structures by Backside Irradiation [DOI: 10.2961/jlmn.2016.03.0006]
|
|
|
Tomoka Nakazumi, Research Insitute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
Tadatake Sato, Research Insitute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
|
|
|
(pp.317
-
320)
Received: May 20, 2016,
Accepted: August 22, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Waveguide Fabrication in Yb³+ Doped Phosphate Glass by 50 kHz Repetition Rate Ultrafast Laser [DOI: 10.2961/jlmn.2016.03.0007]
|
|
|
Xin Liu, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of CAS;
Jing Bai, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of CAS;
Wei Zhao, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of CAS;
Guanghua Cheng, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of CAS;
|
|
|
(pp.321
-
325)
Received: May 22, 2016,
Accepted: August 22, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
A Single-step Process of Generating Hollow and Porous TiO2 Nanoparticles by Picosecond Laser Ablation in Deionised Water [DOI: 10.2961/jlmn.2016.03.0008]
|
|
|
Abubaker Hamad, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester;
Lin Li, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester;
Zhu Liu, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester;
Xiang Li Zhong, School of Materials, The University of Manchester;
|
|
|
(pp.326
-
332)
Received: February 12, 2016,
Accepted: August 24, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Laser Direct Writing of Copper Circuits on Flexible Substrates for Electronic Devices [DOI: 10.2961/jlmn.2016.03.0009]
|
|
|
Shi Bai, Institute of Laser Engineering; Beijing University of Technology;
Weiping Zhou, Institute of Laser Engineering; Beijing University of Technology;
Tingxiu Hou, Institute of Laser Engineering; Beijing University of Technology;
Anming Hu, Institute of Laser Engineering; Beijing University of Technology;
|
|
|
(pp.333
-
336)
Received: May 21, 2016,
Accepted: August 31, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Fabrication of P-, Sb-, and Mg-Doped ZnO Spherical Microcrystals by Laser Ablation in Air [DOI: 10.2961/jlmn.2016.03.0010]
|
|
|
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Toshinobu Tanaka, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Takeshi Ueyama , Graduate School of Information Science and Electrical Engineering, Kyushu University;
Tatsuya Ikebuchi, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Yuki Fujiwara, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Fumiaki Nagasaki, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Shuhei Takao, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Hiroshi Ikenoue , Graduate School of Information Science and Electrical Engineering, Kyushu University;
Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
|
|
|
(pp.337
-
340)
Received: June 24, 2016,
Accepted: August 31, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Formation of Micro-lens Array using Femtosecond and CO2 lasers [DOI: 10.2961/jlmn.2016.03.0011]
|
|
|
Hun-Kook Choi, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST);
Jinchang Ryu, Charm Engineering Co., Ltd.;
Chanju Kim, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST);
Young-Chul Noh, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST);
Ik-Bu Sohn, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST);
Jin-Tae Kim, Department of Photonic Engineering, Chosun University;
|
|
|
(pp.341
-
345)
Received: May 20, 2016,
Accepted: September 1, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Modification and Dynamics inside Diamond by Femtosecond Laser Double-Pulse Irradiation [DOI: 10.2961/jlmn.2016.03.0012]
|
|
|
Masaaki Sakakura, Office of Society-Academia Collaboration for Innovation, Kyoto University;
Takuro Okada, Dept. of Material Chemistry, Graduate School of Eng., Kyoto University;
Vibhav Bharadwaj, Istituto di Fotonica e Nanotecnologie (IFN) - CNR, and Dipartimento di Fisica, Politecnico di Milano;
Belén Sotillo, Istituto di Fotonica e Nanotecnologie (IFN) - CNR, and Dipartimento di Fisica, Politecnico di Milano;
Shane M. Eaton, Istituto di Fotonica e Nanotecnologie (IFN) - CNR, and Dipartimento di Fisica, Politecnico di Milano;
Roberta Ramponi, Istituto di Fotonica e Nanotecnologie (IFN) - CNR, and Dipartimento di Fisica, Politecnico di Milano;
Ali Serpengüzel, Microphotonics Research Laboratory, Department of Physics, Koç University;
Ulaş S. Gökay, Microphotonics Research Laboratory, Department of Physics, Koç University;
Yasuhiko Shimotsuma, Dept. of Material Chemistry, Graduate School of Eng., Kyoto University;
Kiyotaka Miura, Dept. of Material Chemistry, Graduate School of Eng., Kyoto University;
|
|
|
(pp.346
-
351)
Received: May 21, 2016,
Accepted: September 11, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Bessel-like Beam Array Generation Using Round-tip Micro-structures and Their Use in the Material Treatment [DOI: 10.2961/jlmn.2016.03.0013]
|
|
|
Evaldas Stankevičius, Center for Physical Sciences and Technology;
Mantas Garliauskas , Center for Physical Sciences and Technology;
Gediminas Račiukaitis, Center for Physical Sciences and Technology;
|
|
|
(pp.352
-
356)
Received: May 24, 2016,
Accepted: September 15, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Initial Cumulative Effects in Femtosecond Pulsed Laser-induced Periodic Surface Structures on Bulk Metallic Glasses [DOI: 10.2961/jlmn.2016.03.0014]
|
|
|
Chen Li, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon;
Hao Zhang, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon;
Guanghua Cheng, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics;
Nicolas Faure, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon;
Damien Jamon, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon;
Jean-Philippe Colombier, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon;
Razvan Stoian, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon;
|
|
|
(pp.357
-
365)
Received: May 21, 2015,
Accepted: September 15, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
Development of a Mathematical Model Relating Microstructures Evolvement to Optical Appearance of Laser-induced Polychrome Oxides on Iron Substrates [DOI: 10.2961/jlmn.2016.03.0015]
|
|
|
Taotao Wu, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology;
Chenghua Wei, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology;
Menglian Zhou, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology;
Yongxiang Zhu, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology;
Mingying Song , State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology;
Lijun Wang, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology;
|
|
|
(pp.366
-
371)
Received: May 24, 2016,
Accepted: September 26, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
Deep-Trench Structure of Carbon-Fiber-Reinforced Thermoplastics (CFRTP) by Laser Cutting with a Single-Mode IR Fiber Laser [DOI: 10.2961/jlmn.2016.03.0016]
|
|
|
Hiroyuki Niino, National Institute of Advanced Industrial Science and Technology (AIST);
Yoshihisa Harada, National Institute of Advanced Industrial Science and Technology (AIST);
Akira Fujisaki, Furukawa Electric Co., Ltd.;
|
|
|
(pp.372
-
376)
Received: May 29, 2016,
Accepted: September 27, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
Laser Structuring for Control of Coupling Between THz Light and Phonon Modes [DOI: 10.2961/jlmn.2016.03.0017]
|
|
|
Xuewen Wang, Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology;
Gediminas Seniutinas , Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology;
Armandas Balčytis, Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology;
Irmantas Kašalynas, Center for Physical Sciences and Technology;
Vytautas Jakštas, Center for Physical Sciences and Technology;
Vytautas Janonis, Center for Physical Sciences and Technology;
Rimvydas Venckevičius, Center for Physical Sciences and Technology;
Ričardas Buividas, Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology;
Dominique Appadoo, Australian Synchrotron;
Gintaras Valušis, Center for Physical Sciences and Technology;
Saulius Juodkazis, Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology;
|
|
|
(pp.377
-
380)
Received: May 22, 2016,
Accepted: October 6, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
Monitoring of the Femtosecond Laser Micromachining Process of Materials Immersed in Water by Use of Laser-Induced Breakdown Spectroscopy [DOI: 10.2961/jlmn.2016.03.0018]
|
|
|
Aurimas Baskevicius, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Ona Balachninaite, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Mykolas Karpavicius, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Simas Butkus, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Domas Paipulas, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
Valdas Sirutkaitis, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
|
|
|
(pp.381
-
387)
Received: June 7, 2016,
Accepted: October 6, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19
|
|
Laser Thin Film Patterning for Rapid Prototyping and Customised Production of Flexible Electronics Devices [DOI: 10.2961/jlmn.2016.03.0019]
|
|
|
Nicola Bellini, Oxford Lasers Ltd.;
Riccardo Geremia, Oxford Lasers Ltd.;
Shane Norval, FlexEnable Ltd.;
Guillaume Fichet, FlexEnable Ltd.;
Dimitris Karnakis, Oxford Lasers Ltd.;
|
|
|
(pp.388
-
394)
Received: July 18, 2016,
Accepted: October 12, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20
|
|
Laser Micromachining of PEDOT:PSS/Graphene Thin Films by Using Beam Shaping Technology [DOI: 10.2961/jlmn.2016.03.0020]
|
|
|
Chien-Kai Chung, Instrument Technology Research Center, National Applied Research Laboratories;
Shih-Feng Tseng, Instrument Technology Research Center, National Applied Research Laboratories;
Wen-Tse Hsiao, Instrument Technology Research Center, National Applied Research Laboratories;
Donyau Chiang , Instrument Technology Research Center, National Applied Research Laboratories;
Wei-Cheng Lin, Instrument Technology Research Center, National Applied Research Laboratories;
|
|
|
(pp.395
-
399)
Received: June 16, 2016,
Accepted: October 12, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21
|
|
(Technical Communication) Advances in 193 nm Lasers for Fiber Bragg Grating Manufacturing [DOI: 10.2961/jlmn.2016.03.0021]
|
|
|
Ralph Delmdahl, Coherent LaserSystems GmbH & Co. KG;
Hans-Gerd Esser, Coherent LaserSystems GmbH & Co. KG;
Burkhard Fechner, Coherent LaserSystems GmbH & Co. KG;
Remco Nieuwland, Hittech Multin BV;
Per Karlsson, NorthLab Photonics AB;
Robert Rylander, NorthLab Photonics AB;
|
|
|
(pp.400
-
403)
Received: May 9, 2016,
Accepted: August 9, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22
|
|
(Erratum) Minimizing Stitching Errors for Large Area Laser Surface Processing [DOI: 10.2961/jlmn.2016.03.0022]
|
|
|
Moisés Alberto , Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS;
Ortega Delgado, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS;
Andrés Fabián Lasagni, Technische Universität Dresden, Institut für Fertigungstechnik;
|
|
|
(pp.404
-
404)
Received: August 11, 2016,
Accepted: August 11, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
23
|
|
(Erratum) Experimental Investigation of Dimensional Variation in Laser-machined Micro-channels produced in Titanium Alloy [DOI: 10.2961/jlmn.2016.03.0023]
|
|
|
Naveed Ahmed, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University;
Saied Darwish, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University;
Abdulrahman M. Alahmari, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University;
|
|
|
(pp.405
-
405)
Received: September 22, 2016,
Accepted: September 22, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
