|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.12, No.2 (September, 2017) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
Copper Particles Generated During in situ Laser-induced Synthesis Exhibit Catalytic Activity Towards Formation of Gas Phase [DOI: 10.2961/jlmn.2017.02.0001]
|
|
|
Dmitrii Gordeychuk, Saint Petersburg State University;
Vladimir Kochemirovsky, Saint Petersburg State University;
Victor Sorokoumov, Saint Petersburg State University;
Ilya Tumkin, Saint Petersburg State University;
Alexey Kuzmin, Institute for Analytical Instrumentation of the Russian Academy of Sciences;
Irina Balova, Saint Petersburg State University;
|
|
|
(pp.57
-
61)
Received: June 20, 2016,
Accepted: May 7, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Study on Site-specific Polishing of Polycrystalline Diamond Film by KrF Excimer Laser [DOI: 10.2961/jlmn.2017.02.0002]
|
|
|
Lanxi Wang, National Key Laboratory of Science and Technology on Vacuum Technology and Physics, Lanzhou Institute of physics;
Xuekang Chen , National Key Laboratory of Science and Technology on Vacuum Technology and Physics, Lanzhou Institute of physics;
Gan Wu, National Key Laboratory of Science and Technology on Vacuum Technology and Physics, Lanzhou Institute of physics;
Shengzhu Cao, National Key Laboratory of Science and Technology on Vacuum Technology and Physics, Lanzhou Institute of physics;
Yuqing Xiong, National Key Laboratory of Science and Technology on Vacuum Technology and Physics, Lanzhou Institute of physics;
Jinxiao Wang, National Key Laboratory of Science and Technology on Vacuum Technology and Physics, Lanzhou Institute of physics;
Dongcai Zhao, National Key Laboratory of Science and Technology on Vacuum Technology and Physics, Lanzhou Institute of physics;
|
|
|
(pp.62
-
66)
Received: September 3, 2016,
Accepted: May 15, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Two-Dimensional Low Spatial Frequency Laser-Induced Periodic Surface Structuring of Sapphire [DOI: 10.2961/jlmn.2017.02.0003]
|
|
|
Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences;
Stefan Rung, Applied Laser and Photonics Group, University of Applied Sciences;
Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences;
|
|
|
(pp.67
-
71)
Received: March 3, 2017,
Accepted: May 15, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Femtosecond-Laser-Induced Defects on Silicon Carbide Probed by Electrical Conductivity [DOI: 10.2961/jlmn.2017.02.0004]
|
|
|
Takuro Tomita, Faculty of Engineering, Tokushima University;
Manato Deki, Faculty of Engineering, Tokushima University;
Eizo Yanagita, Faculty of Engineering, Tokushima University;
Yota Bando, Faculty of Engineering, Tokushima University;
Yoshiki Naoi, Faculty of Engineering, Tokushima University;
|
|
|
(pp.72
-
75)
Received: April 3, 2017,
Accepted: June 3, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Fabrication of Cylindrical Lenses by Combining Ultrashort Pulsed Laser and CO2 Laser [DOI: 10.2961/jlmn.2017.02.0005]
|
|
|
Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences;
Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences;
|
|
|
(pp.76
-
79)
Received: April 3, 2017,
Accepted: June 27, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Two-Photon Direct Laser Writing for Proteinaceous Microstructures with Additional Sensitizer [DOI: 10.2961/jlmn.2017.02.0006]
|
|
|
Daniela Serien, The University of Tokyo, Institute of Industrial Science (IIS);
Shoji Takeuchi, The University of Tokyo, Institute of Industrial Science (IIS);
|
|
|
(pp.80
-
85)
Received: June 30, 2016,
Accepted: July 18, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Optical Trap Assisted Nanopatterning: Process Parallelization and Dynamic Structure Generation [DOI: 10.2961/jlmn.2017.02.0007]
|
|
|
Johannes Strauss, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU);
Marcus Baum, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU);
Ilya Alexeev, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU);
Michael Schmidt, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU);
|
|
|
(pp.86
-
90)
Received: May 23, 2015,
Accepted: July 30, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Stress-Assisted Shock-Wave-Induced Thin-Film Delamination (SWIFD) of CIGS on a Flexible Substrate [DOI: 10.2961/jlmn.2017.02.0008]
|
|
|
Pierre Lorenz, Leibniz Institute of Surface Modification;
Igor Zagoranskiy, Leibniz Institute of Surface Modification;
Joachim Zajadacz, Leibniz Institute of Surface Modification;
Martin Ehrhardt, Laser-Material Interaction Lab, 2011 Co-innovation Center, Nanjing University of Science & Technology;
Bing Han, Laser-Material Interaction Lab, 2011 Co-innovation Center, Nanjing University of Science & Technology;
Lukas Bayer, Leibniz Institute of Surface Modification;
Klaus Zimmer, Leibniz Institute of Surface Modification;
|
|
|
(pp.91
-
96)
Received: February 24, 2017,
Accepted: July 30, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Experimental Investigation of Speckle Pattern by Laser Scribing for Digital Image Correlation [DOI: 10.2961/jlmn.2017.02.0009]
|
|
|
Chao-Ching Ho, Graduate Institute of Manufacturing Technology and Department of Mechanical Engineering, Na-tional Taipei University of Technology;
Dung-ShengWu, Department of Mechanical Engineering, National Yunlin University of Science and Technology;
Yuan-Jen Chang, Department of Mechanical Engineering, National Yunlin University of Science and Technology;
Jin-Chen Hsu, Department of Mechanical Engineering, National Yunlin University of Science and Technology;
Chia-Lung Kuo, Department of Mechanical Engineering, National Yunlin University of Science and Technology;
Shih-Kang Kuo, Green Energy and System Integration Research and Development Department, China Steel Corporation;
|
|
|
(pp.97
-
101)
Received: May 8, 2017,
Accepted: August 1, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Regeneration of a Grating in PMMA Inscribed by Femtosecond Laser Bessel Beam [DOI: 10.2961/jlmn.2017.02.0010]
|
|
|
Wataru Watanabe, Department of Electrical & Electronic Engineering, College of Science and Engineering, Ritsumeikan University;
Yu Matushiro, Department of Electrical & Electronic Engineering, College of Science and Engineering, Ritsumeikan University;
Koji Hatanaka, Research Center for Applied Sciences, Academia Sinica;
Saulius Juodkazis, Faculty of Science, Engineering and Technology, Swinburne University of Technology;
|
|
|
(pp.102
-
106)
Received: May 25, 2017,
Accepted: August 1, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Increasing the Specific Removal Rate for Ultra Short Pulsed Laser-Micromachining by Using Pulse Bursts [DOI: 10.2961/jlmn.2017.02.0011]
|
|
|
Torsten Kramer, Institute for Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
Yiming Zhang, Institute for Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
Stefan Remund, Institute for Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
Beat Jaeggi, Institute for Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
Andreas Michalowski , Laser Material Processing (CR/APJ2), Robert Bosch GmbH;
Lisa Grad, Laser Material Processing (CR/APJ2), Robert Bosch GmbH;
Beat Neuenschwander, Institute for Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
|
|
|
(pp.107
-
114)
Received: May 22, 2016,
Accepted: August 8, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Influence of Wavelength on Glass Welding by Ultra-Short Laser Pulses [DOI: 10.2961/jlmn.2017.02.0012]
|
|
|
Kristian Cvecek, blz – Bayerisches Laserzentrum;
Florian Stenglein, blz – Bayerisches Laserzentrum;
Isamu Miyamoto, SAOT - Erlangen Graduate School in Advanced Optical Technologies , Friedrich-Alexander-University of Erlangen-Nuremberg;
Michael Schmidt, blz – Bayerisches Laserzentrum;
|
|
|
(pp.115
-
119)
Received: May 31, 2017,
Accepted: August 8, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Multipoint Measurement Using an Inline Fibre Optic Spectrometer Fabricated with a 400 nm Femtosecond Laser [DOI: 10.2961/jlmn.2017.02.0013]
|
|
|
Kenji Goya, Health Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Masahiko Shiraishi, Department of Information Systems Science, Faculty of Engineering, Soka University;
Atsushi Seki, Department of Science and Engineering for Sustainable Innovation,Faculty of Science and Engineering, Soka University;
Kazuhiro Watanabe, Department of Science and Engineering for Sustainable Innovation,Faculty of Science and Engineering, Soka University;
Yusuke Fuchiwaki, Health Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Toshihiko Ooie, Health Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
|
|
|
(pp.120
-
125)
Received: August 31, 2016,
Accepted: August 11, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Suppression of Stress and Crack Generation in Local Glass Melting by Picosecond Laser Irradiation at a High Repetition Rates with Temporal Energy Modulation [DOI: 10.2961/jlmn.2017.02.0014]
|
|
|
Akinao Nakamura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University ;
Masaaki Sakakura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University ;
Yasuhiko Shimotsuma, Department of Material Chemistry, Graduate School of Engineering, Kyoto University ;
Kiyotaka Miura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University ;
|
|
|
(pp.126
-
131)
Received: June 21, 2017,
Accepted: August 16, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
Effect of Picosecond Laser Based Modifications of Amorphous Carbon Coatings on Lubricant-free Tribological Systems [DOI: 10.2961/jlmn.2017.02.0015]
|
|
|
Tom Häfner, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg;
Johannes Heberle, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg;
Hubert Hautmann, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg;
Rong Zhao, Institute of Engineering Design, Friedrich-Alexander-Universität Erlangen-Nürnberg;
Jennifer Tenner, Institute of Manufacturing Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg;
Stephan Tremmel , Institute of Engineering Design, Friedrich-Alexander-Universität Erlangen-Nürnberg;
Marion Merklein, Erlangen Graduate School in Advanced Optical Technologies (SAOT), Friedrich-Alexander-Universität Erlangen-Nürnberg;
Michael Schmidt, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg;
|
|
|
(pp.132
-
140)
Received: June 4, 2017,
Accepted: August 24, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
Removal Processing inside PDMS by Short Pulse Laser [DOI: 10.2961/jlmn.2017.02.0016]
|
|
|
Katsuyuki Hayashi, Department of Mechanical Engineering, Shibaura Institute of Technology;
Shigeki Matsuo, Department of Mechanical Engineering, Shibaura Institute of Technology;
|
|
|
(pp.141
-
145)
Received: July 22, 2017,
Accepted: September 3, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
Laser Induced Rectangular Microstructures for Surface of Cavitation Erosion Resistance [DOI: 10.2961/jlmn.2017.02.0017]
|
|
|
Haifeng Yang, School of mechatronic Engineering, China University of Mining & Technology;
Bo Sun, School of mechatronic Engineering, China University of Mining & Technology;
Hao Liu, School of mechatronic Engineering, China University of Mining & Technology;
Yanqing Wang, School of material science and Engineering, Xuzhou Institute of Technology;
Kun Liu, School of mechatronic Engineering, China University of Mining & Technology;
Xianhua Tian, School of mechatronic Engineering, China University of Mining & Technology;
|
|
|
(pp.146
-
152)
Received: May 7, 2017,
Accepted: September 10, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
UV Laser Photo-Polymerization of Elastic 2D/3D Structures Using Photo-Curable PDMS (Polydimethylsiloxane) [DOI: 10.2961/jlmn.2017.02.0018]
|
|
|
Oliver Suttmann, Laser Zentrum Hannover e.V.;
Kotaro Obata, Laser Zentrum Hannover e.V.;
Yasutaka Nakajima, School of Integrated Design Engineering, Keio University;
Arndt Hohnholz, Laser Zentrum Hannover e.V.;
Jürgen Koch, Laser Zentrum Hannover e.V.;
Mitsuhiro Terakawa, School of Integrated Design Engineering, Keio University;
Ludger Overmeyer, Laser Zentrum Hannover e.V.;
|
|
|
(pp.153
-
158)
Received: June 30, 2017,
Accepted: September 10, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19
|
|
Observation of Stress Wave and Thermal Stress in Ultrashort Pulse Laser Bulk Processing inside Glass [DOI: 10.2961/jlmn.2017.02.0019]
|
|
|
Masaaki Sakakura, Next Generation Laser Processing Technology Research Association;
Yasuhiko Shimotsuma, Next Generation Laser Processing Technology Research Association;
Kiyotaka Miura, Dept. of Material Chemistry, Graduate School of Eng., Kyoto University;
|
|
|
(pp.159
-
164)
Received: June 19, 2017,
Accepted: September 10, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20
|
|
Tuning the Structures and Properties of Porous Graphene in Laser-Induced Graphitization [DOI: 10.2961/jlmn.2017.02.0020]
|
|
|
Fangcheng Wang, State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University;
Kedian Wang, State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University;
Xia Dong, State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University;
Xuesong Mei, State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University;
Zhaoyang Zhai, State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University;
Jing Lv, State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University;
Wenqiang Duan, State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University;
Meng Gao, State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University;
|
|
|
(pp.165
-
168)
Received: February 23, 2017,
Accepted: September 14, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21
|
|
(Technical Communication) Electroless Deposition of Confined Copper Layers Based on Selective Activation by Pulsed Laser Irradiation [DOI: 10.2961/jlmn.2017.02.0021]
|
|
|
Rui Zhou, School of Aerospace Engineering, Xiamen University;
Tingting Huang, School of Aerospace Engineering, Xiamen University;
Lijuan Chen, School of Aerospace Engineering, Xiamen University;
Sijie Chen, School of Aerospace Engineering, Xiamen University;
Shengdong Lin , School of Aerospace Engineering, Xiamen University;
Yong Zhuo, School of Aerospace Engineering, Xiamen University;
|
|
|
(pp.169
-
175)
Received: April 25, 2017,
Accepted: September 3, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
