|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.12, No.3 (December, 2017) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
Comparative Study of Refractive Index Sensing Based on Three Different Long-Period Grating Configurations by Pulsed ArF Excimer Laser [DOI: 10.2961/jlmn.2017.03.0001]
|
|
|
Jian-Neng Wang, Department of Civil and Construction Engineering, National Yunlin University;
Wei-Te Wu, Department of Biomechatronics Engineering, National Pingtung University;
Chien-Hsing Chen, Department of Physics, National Chung Cheng University;
|
|
|
(pp.176
-
183)
Received: June 5, 2017,
Accepted: September 24, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Surface Alloying of Titanium Using a Nanosecond Laser with a Light-Transmitting Resin [DOI: 10.2961/jlmn.2017.03.0002]
|
|
|
Takuto Yamaguchi, Osaka Research Institute of Industrial Science and Technology;
Hideki Hagino, Osaka Research Institute of Industrial Science and Technology;
|
|
|
(pp.184
-
188)
Received: May 23, 2017,
Accepted: September 30, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Resistance Measurement of Laser Welded Dissimilar Al/Cu Joints [DOI: 10.2961/jlmn.2017.03.0003]
|
|
|
P. Schmalen, University of Luxembourg;
P. Plapper, University of Luxembourg;
|
|
|
(pp.189
-
194)
Received: June 3, 2017,
Accepted: September 30, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Investigation of Nd³+:YAG Laser Aided Surface Texturing to Improve Tribological Characteristics of Piston Ring [DOI: 10.2961/jlmn.2017.03.0004]
|
|
|
V. Ezhilmaran, Department of Mechanical Engineering, Indian Institute of Technology Madras;
L. Vijayaraghavan, Department of Mechanical Engineering, Indian Institute of Technology Madras;
N. J. Vasa, Department of Engineering Design, Indian Institute of Technology Madras;
|
|
|
(pp.195
-
202)
Received: June 5, 2017,
Accepted: September 30, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Water-Assisted Laser Drilling for Miniature Internal Thread in Glass and Evaluation of Its Strength [DOI: 10.2961/jlmn.2017.03.0005]
|
|
|
Reo Murakami, Department of Mechanical Engineering, Shibaura Institute of Technology;
Hiroyuki Nakagawa, Department of Mechanical Engineering, Shibaura Institute of Technology;
Shigeki Matsuo, Department of Mechanical Engineering, Shibaura Institute of Technology;
|
|
|
(pp.203
-
206)
Received: June 16, 2017,
Accepted: September 30, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Characterization of Refractive Index Change Induced by Femtosecond Laser in Lithium Niobate [DOI: 10.2961/jlmn.2017.03.0006]
|
|
|
Jian-Guan Hua, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University;
Feng Yu, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University;
Zhen-Nan Tian, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University;
Yan-Hao Yu, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University;
Yong-Sen Yu, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University;
|
|
|
(pp.207
-
211)
Received: July 25, 2017,
Accepted: October 3, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Laser-Induced Superhydrophobic Ti-Ni Shape Memory Alloy with Corrosion Resistance and Self-Cleaning Properties [DOI: 10.2961/jlmn.2017.03.0007]
|
|
|
Tianchi Chen, School of Mechanical & Electrical Engineering, China University of Mining and Technology;
Shirong Ge, School of Mechanical & Electrical Engineering, China University of Mining and Technology;
Hongtao Liu, School of Materials Science and Engineering, China University of Mining and Technology;
|
|
|
(pp.212
-
216)
Received: August 3, 2017,
Accepted: October 12, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
The Characteristic of Birefringence and Optical Loss in Femtosecond-Laser-Induced Region in terms of Nanogratings Distribution [DOI: 10.2961/jlmn.2017.03.0008]
|
|
|
Takafumi Ohfuchi, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Yuya Yamada, Hitachi Zosen Corporation;
Masaaki Sakakura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Naoaki Fukuda, Hitachi Zosen Corporation;
Toshio Takiya, Hitachi Zosen Corporation;
Yasuhiko Shimotsuma, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
Kiyotaka Miura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
|
|
|
(pp.217
-
221)
Received: May 23, 2016,
Accepted: October 17, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Nanosecond Laser Treatment of a-Si Thin Films for Enhanced Light Trapping and Minority Carrier Lifetime in Photovoltaic Cells [DOI: 10.2961/jlmn.2017.03.0009]
|
|
|
Esther Blesso Vidhya Y , Department of Engineering Design, Indian Institute of Technology;
Nilesh J Vasa , Department of Engineering Design, Indian Institute of Technology;
|
|
|
(pp.222
-
229)
Received: June 6, 2017,
Accepted: October 17, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Time-Resolved Reflectivity and Temperature Measurements During Laser Irradiation of Crystalline Silicon [DOI: 10.2961/jlmn.2017.03.0010]
|
|
|
Michael Diez, Robert Bosch GmbH, C/CEP;
Mawuli Ametowobla, Robert Bosch GmbH, CR/APJ2, Robert-Bosch-Campus;
Thomas Graf, Institut für Strahlwerkzeuge, University Stuttgart;
|
|
|
(pp.230
-
234)
Received: August 29, 2017,
Accepted: October 17, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Thermal Damage of Carbon Fiber Reinforced Plastic by IR Fiber Laser Irradiation [DOI: 10.2961/jlmn.2017.03.0011]
|
|
|
Hiroyuki Niino, National Institute of Advanced Industrial Science and Technology (AIST);
Yoshihisa Harada, National Institute of Advanced Industrial Science and Technology (AIST);
Akira Fujisaki, Furukawa Electric Co., Ltd.;
|
|
|
(pp.235
-
238)
Received: June 14, 2017,
Accepted: October 22, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Laser Drop on Demand Micro Joining for High Temperature Wire Bonding Applications – System Technology And Mechanical Joint Performance [DOI: 10.2961/jlmn.2017.03.0012]
|
|
|
Stefan Stein, Bayerisches Laserzentrum GmbH (blz);
Jasmin Dippert, Bayerisches Laserzentrum GmbH (blz);
Stephan Roth, Bayerisches Laserzentrum GmbH (blz);
Michael Schmidt, Bayerisches Laserzentrum GmbH (blz);
|
|
|
(pp.239
-
247)
Received: August 7, 2017,
Accepted: October 22, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Fabrication of Micropits by LIBWE for Laser Marking of Glass Materials [DOI: 10.2961/jlmn.2017.03.0013]
|
|
|
Tadatake Sato, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
Aiko Narazaki, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
Hiroyuki Niino, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
|
|
|
(pp.248
-
253)
Received: June 7, 2017,
Accepted: October 26, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Stable Products of Laser-Induced Breakdown of Aqueous Colloidal Solutions of Nanoparticles [DOI: 10.2961/jlmn.2017.03.0014]
|
|
|
E.V. Barmina, A.M. Prokhorov General Prokhorov Institute of General Physics, Russian Academy of Sciences;
S.V. Gudkov, A.M. Prokhorov General Prokhorov Institute of General Physics, Russian Academy of Sciences;
A.V. Simakin, A.M. Prokhorov General Prokhorov Institute of General Physics, Russian Academy of Sciences;
G.A. Shafeev, A.M. Prokhorov General Prokhorov Institute of General Physics, Russian Academy of Sciences;
|
|
|
(pp.254
-
257)
Received: June 30, 2017,
Accepted: October 28, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
Optimizing the Specific Removal Rate with the Burst Mode Under Varying Conditions [DOI: 10.2961/jlmn.2017.03.0015]
|
|
|
Beat Jaeggi, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies;
Stefan Remund, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies;
Yiming Zhang, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies;
Thorsten Kramer, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies;
Beat Neuenschwander, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies;
|
|
|
(pp.258
-
266)
Received: June 3, 2017,
Accepted: November 20, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
Laser Micromachining of Metals with Ultra-Short Pulses: Factors Limiting the Scale-Up Process [DOI: 10.2961/jlmn.2017.03.0016]
|
|
|
Beat Jaeggi, Institute of Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
Stefan Remund, Institute of Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
Rene Streubel, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg Essen ;
Bilal Goekce, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg Essen ;
Stefan Barcikowski, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg Essen ;
Beat Neuenschwander, Institute of Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
|
|
|
(pp.267
-
273)
Received: June 3, 2017,
Accepted: November 20, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
3D Nano-Fabrication Using Controlled Bessel-Glass Interaction in Ultra-fast Modes [DOI: 10.2961/jlmn.2017.03.0017]
|
|
|
Manoj Kumar Bhuyan, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet;
Praveen Kumar Velpula, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet;
Madhura Somayaji, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet;
Jean-Philippe Colombier, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet;
Razvan Stoian, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet;
|
|
|
(pp.274
-
280)
Received: July 7, 2017,
Accepted: November 20, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
Fast Fabrication of Multilevel Phase Plates Used for Laser Beam Correction [DOI: 10.2961/jlmn.2017.03.0018]
|
|
|
Roman Zakoldaev, ITMO University;
Galina Kostyuk, ITMO University;
Vladimir Rymkevich, ITMO University;
Vladislav Koval, ITMO University;
Maksim Sergeev, ITMO University;
Vadim Veiko, ITMO University;
Evgeny Yakovlev, ITMO University;
Aleksandr Sivers, ITMO University;
|
|
|
(pp.281
-
285)
Received: July 8, 2017,
Accepted: November 20, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19
|
|
Laser Processing of Dry, Wet and Immersed Polyamide Nanofiber Nonwovens with Different Laser Sources [DOI: 10.2961/jlmn.2017.03.0019]
|
|
|
Marco Götze, University of Applied Sciences Merseburg;
Abdul Mannan Farhan, University of Applied Sciences Anhalt;
Tobias Kürbitz, University of Applied Sciences Anhalt;
Olaf Krimig, University of Applied Sciences Merseburg;
Sven Henning, Fraunhofer Institute for Microstructure of Materials and Systems IMWS;
Andreas Heilmann, University of Applied Sciences Anhalt;
Georg Hillrichs, University of Applied Sciences Merseburg;
|
|
|
(pp.286
-
295)
Received: June 1, 2017,
Accepted: November 20, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20
|
|
Efficient Metal Processing Using High Average Power Ultrafast Laser [DOI: 10.2961/jlmn.2017.03.0020]
|
|
|
John Lopez, UNIV BORDEAUX;
Konstantin Mishchik, AMPLITUDE SYSTEMES;
Girolamo Mincuzzi, ALPHANOV;
Eric Audouard, AMPLITUDE SYSTEMES;
Eric Mottay*, AMPLITUDE SYSTEMES;
Rainer Kling, ALPHANOV;
|
|
|
(pp.296
-
303)
Received: June 30, 2017,
Accepted: November 20, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21
|
|
(Technical Communication) Copper Nanoparticles by Laser Ablation Confined in Methanol in the Presence of an Argon Gas Environment [DOI: 10.2961/jlmn.2017.03.0021]
|
|
|
David Omar Oseguera Galindo, Instituto Tecnológico José Mario Molina Pasquel y Henríquez, Unidad Académica Tamazula, Tecnológico Nacional de México ;
Eden Oceguera Contreras, Centro Universitario de los Valles, Universidad de Guadalajara;
|
|
|
(pp.304
-
306)
Received: April 7, 2017,
Accepted: September 3, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22
|
|
(Technical Communication) Laser Percussion Drilling of High Temperature Alloy and Qualitative/ Quantitative Characterization [DOI: 10.2961/jlmn.2017.03.0022]
|
|
|
Hongyu Zhang , State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University;
Ming Zhou, State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University;
Yunlong Wang, School of Material Science and Engineering, Jiangsu University;
Xiangchao Zhang, Shanghai Engineering Research Centre of Ultra-Precision Optical Manufacturing, Fudan University;
Yu Yan, Corrosion and Protection Center, Beijing University of Science and Technology;
Rong Wang, State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University;
|
|
|
(pp.307
-
312)
Received: September 15, 2016,
Accepted: October 7, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
23
|
|
(Technical Communication) Laser Patterning of Thin Film Copper and ITO on Flexible Substrates for Terahertz Antenna Applications [DOI: 10.2961/jlmn.2017.03.0023]
|
|
|
Manikandan Esakkimuthu, Department of Electronics and Communication Engineering, SSN College of Engineering;
Sreeja Balakrishnapillai Suseela, Department of Electronics and Communication Engineering, SSN College of Engineering;
Radha Sankararajan, Department of Electronics and Communication Engineering, SSN College of Engineering;
Abhishek Gupta, Tata Institute of Fundamental Research;
Goutam Rana, Indian Institute of Technology;
Prabhu S. , Tata Institute of Fundamental Research;
|
|
|
(pp.313
-
320)
Received: August 12, 2017,
Accepted: October 17, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24
|
|
(Technical Communication) Drilling of Through Holes in Sapphire Using Femtosec-ond Laser Pulses [DOI: 10.2961/jlmn.2017.03.0024]
|
|
|
Konstantin Mishchik , Amplitude Systemes;
Kevin Gaudfrin, ALPhANOV;
John Lopez , Université Bordeaux – CNRS – CEA;
|
|
|
(pp.321
-
324)
Received: June 30, 2017,
Accepted: December 10, 2017
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
