|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.13, No.2 (September, 2018) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
Laser-Induced Backside Wet Etching of SiO2 with a Visible Ultrashort Laser Pulse by Using KMnO4 Solution as an Absorber Liquid [DOI: 10.2961/jlmn.2018.02.0001]
|
|
|
M. Ehrhardt, Laser-Material Interaction Lab;
P. Lorenz, Leibniz Institute of Surface Modification;
B. Han, Laser-Material Interaction Lab;
R. Zhu, Laser-Material Interaction Lab;
K. Zimmer, Leibniz Institute of Surface Modification;
|
|
|
(pp.47
-
54)
Received: December 19, 2017,
Accepted: May 10, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Multi-Material Deposition of Polymer Powders with Vibrating Nozzles for a New Approach of Laser Sintering [DOI: 10.2961/jlmn.2018.02.0002]
|
|
|
Thomas Stichel, Bayerisches Laserzentrum GmbH;
Tobias Laumer, Bayerisches Laserzentrum GmbH;
Max Raths, Bayerisches Laserzentrum GmbH;
Stephan Roth, Bayerisches Laserzentrum GmbH;
|
|
|
(pp.55
-
62)
Received: October 12, 2017,
Accepted: May 13, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Low-Profile Interconnects via Laser-Induced Forward Transfer [DOI: 10.2961/jlmn.2018.02.0003]
|
|
|
Kristin M. Charipar, Naval Research Laboratory, Materials Science & Technology Division;
Nicholas A. Charipar, Naval Research Laboratory, Materials Science & Technology Division;
Raymond C.Y. Auyeung, Naval Research Laboratory, Materials Science & Technology Division;
Heungsoo Kim , Naval Research Laboratory, Materials Science & Technology Division;
Alberto Piqué, Naval Research Laboratory, Materials Science & Technology Division;
|
|
|
(pp.63
-
67)
Received: June 23, 2018,
Accepted: August 25, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Protecting Sub-Micrometer Surface Features in Polymers from Mechanical Damage Using Hierarchical Patterns [DOI: 10.2961/jlmn.2018.02.0004]
|
|
|
Florian Roessler, Technische Universität Dresden, Institut für Fertigungstechnik;
Andrés F. Lasagni, Technische Universität Dresden, Institut für Fertigungstechnik;
|
|
|
(pp.68
-
75)
Received: May 14, 2018,
Accepted: August 26, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Laser Micro Machining of Alumina by a Picosecond Laser [DOI: 10.2961/jlmn.2018.02.0005]
|
|
|
Eric Gärtner, Fraunhofer - Institute for Machine Tools and Forming Technology IWU;
Vittorio Polise, University of Naples Federico II, Department of Industrial Engineering;
Flaviana Tagliaferri, Technische Universität Chemnitz, Institute for Machine Tools and Production Processes (IWP);
Biagio Palumbo, University of Naples Federico II, Department of Industrial Engineering;
|
|
|
(pp.76
-
84)
Received: June 22, 2018,
Accepted: August 26, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Use of an Elastomeric Donor for LIFT of Metal Foils [DOI: 10.2961/jlmn.2018.02.0006]
|
|
|
Kristin M. Charipar, Materials Science and Technology Division, Code 6360, Naval Research Laboratory;
Raymond C.Y. Auyeung, Materials Science and Technology Division, Code 6360, Naval Research Laboratory;
Heungsoo Kim, Materials Science and Technology Division, Code 6360, Naval Research Laboratory;
Nicholas A. Charipar , Materials Science and Technology Division, Code 6360, Naval Research Laboratory;
Alberto Piqué, Materials Science and Technology Division, Code 6360, Naval Research Laboratory;
|
|
|
(pp.85
-
89)
Received: June 24, 2018,
Accepted: August 26, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Homogeneous Low Spatial Frequency LIPSS on Dielectric Materials Generated by Beam-Shaped Femtosecond Pulsed Laser Irradiation [DOI: 10.2961/jlmn.2018.02.0007]
|
|
|
Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Stefan Rung, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum;
Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
|
|
|
(pp.90
-
94)
Received: June 25, 2018,
Accepted: September 6, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Heat Accumulation Effects during Ultrashort Pulse Laser Ablation with Spatially Shaped Beams [DOI: 10.2961/jlmn.2018.02.0008]
|
|
|
Dmitriy Mikhaylov, Robert Bosch Manufacturing Solutions GmbH;
Thomas Kiedrowski, Robert Bosch GmbH;
Andrés Fabián Lasagni, Institut für Fertigungstechnik, Technische Universität Dresden;
|
|
|
(pp.95
-
99)
Received: July 12, 2018,
Accepted: September 6, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Static and Dynamic Contact Angle of Water Influenced by Femtosecond Laser Based Ripple Structures on Metals [DOI: 10.2961/jlmn.2018.02.0009]
|
|
|
Stefan Rung , Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Julian Zettl, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Babette Götzendorfer, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Cemal Esen, Applied Laser Technologies, Ruhr- University Bochum;
Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
|
|
|
(pp.100
-
104)
Received: June 24, 2018,
Accepted: September 9, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Laser-Induced Periodic Surface Structures (LIPSS) on Polymers Processed with Picosecond Laser Pulses [DOI: 10.2961/jlmn.2018.02.0010]
|
|
|
Marek Mezera, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces and Systems (MS3), Facul-ty of Engineering Technology, University of Twente;
Martin van Drongelen, Chair of Production Technology, Department of Mechanics of Solids, Surfaces and Systems (MS3), Faculty of Engineering Technology, University of Twente;
G.R.B.E. Römer, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces and Systems (MS3), Facul-ty of Engineering Technology, University of Twente;
|
|
|
(pp.105
-
116)
Received: June 24, 2018,
Accepted: September 12, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Investigation to Increase the Welding Joint Area with Modulated Laser Beam Welding over Gap [DOI: 10.2961/jlmn.2018.02.0011]
|
|
|
Woo-Sik Chung, Fraunhofer Institute for Laser Technology ILT;
Andre Haeusler, Fraunhofer Institute for Laser Technology ILT;
Alexander Olowinsky, Fraunhofer Institute for Laser Technology ILT;
Arnold Gillner, Fraunhofer Institute for Laser Technology ILT;
Reinhart Poprawe, Fraunhofer Institute for Laser Technology ILT;
|
|
|
(pp.117
-
125)
Received: June 24, 2018,
Accepted: September 12, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Ultrashort Pulse Processing of Transparent Ceramics: The Role of Electronic and Thermal Damage Mechanisms [DOI: 10.2961/jlmn.2018.02.0012]
|
|
|
Christian Kalupka, Fraunhofer Institute for Laser Technology ILT;
Martin Schmalstieg, Chair for Laser Technology LLT, RWTH Aachen University;
Martin Reininghaus, Fraunhofer Institute for Laser Technology ILT;
|
|
|
(pp.126
-
130)
Received: June 25, 2018,
Accepted: September 12, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Embedded Metal Microstructures in Glass Substrates by a Combined Laser Trenching and Printing Process [DOI: 10.2961/jlmn.2018.02.0013]
|
|
|
Yuval Berg, Additive Manufacturing Group, Orbotech Ltd.;
Shoshana Winter , Additive Manufacturing Group, Orbotech Ltd.;
Zvi Kotler, Additive Manufacturing Group, Orbotech Ltd.;
Yosi Shacham-Diamand, Department of Physical Electronics, Faculty of Engineering, Tel Aviv University;
|
|
|
(pp.131
-
134)
Received: June 24, 2018,
Accepted: September 23, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
(Technical Communication) Interconnection for Power Electronics Using Laser Ablation [DOI: 10.2961/jlmn.2018.02.0014]
|
|
|
Tian Long See, The Manufacturing Technology Centre;
Adele Pliscott, The Manufacturing Technology Centre;
Naim Kapadia, The Manufacturing Technology Centre;
|
|
|
(pp.135
-
139)
Received: June 6, 2018,
Accepted: September 9, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
(Technical Communication) Investigation on Laser Scanner Synchronization via Advanced Beam Path Analysis in 3D Additive Manufacturing Systems [DOI: 10.2961/jlmn.2018.02.0015]
|
|
|
Andreas Koglbauer, PRIMES GmbH;
Stefan Wolf, PRIMES GmbH;
Otto Märten, PRIMES GmbH;
Reinhard Kramer, PRIMES GmbH;
|
|
|
(pp.140
-
144)
Received: June 21, 2018,
Accepted: September 12, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
(Erratum)Effect of Laser Irradiation on the Properties of ZnO Buffer Layers and Its Application to Selective-Growth of ZnO Nano/Microcrystals [DOI: 10.2961/jlmn.2018.02.0016]
|
|
|
Tetsuya Shimogaki, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Hirotaka Kawahara, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Shihomi Nakao, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Kosuke Harada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Hiroshi Ikenoue, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Yoshiki Nakata, Institute of Laser Engineering, Osaka University;
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
|
|
|
(pp.145
-
145)
Received: June 19, 2018,
Accepted: June 20, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
