|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.13, No.3 (December, 2018) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
Observation of Continuous and Non-continuous Laser Induced Periodic Structures on Silicon [DOI: 10.2961/jlmn.2018.03.0001]
|
|
|
Pravakar Satapathy , Dept. of Physics, School of Applied Sciences, KIIT Deemed to be University;
Rudrashish Panda, Dept. of Physics, School of Applied Sciences, KIIT Deemed to be University;
Rajashree Sahoo, Dept. of Physics, School of Applied Sciences, KIIT Deemed to be University;
Mukesh Kumar Shukla, School of Physical Sciences, NISER;
Lizina Khatua, School of Electronics Engineering, KIIT University;
Pratap Kumar Sahoo, School of Physical Sciences, NISER;
Ritwick Das, School of Physical Sciences, NISER;
Susanta Kumar Das, Dept. of Physics, School of Applied Sciences, KIIT Deemed to be University;
|
|
|
(pp.146
-
149)
Received: May 1, 2018,
Accepted: September 9, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Hybrid Laser Scribing and Chemical Etching Technique using Pulsed Nd³+:YAG Laser to Fabricate Controlled Micro Channel Profile [DOI: 10.2961/jlmn.2018.03.0002]
|
|
|
Srinagalakshmi Nammi, Department of Engineering Design, Indian Institute of Technology Madras;
Sooraj Shiby, Department of Engineering Design, Indian Institute of Technology Madras;
Bharat S Amroop, Department of Engineering Design, Indian Institute of Technology Madras;
Nilesh J Vasa, Department of Engineering Design, Indian Institute of Technology Madras;
|
|
|
(pp.150
-
154)
Received: June 6, 2017,
Accepted: October 7, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Vertical Microchannels for Microfluidic Multilayer Interconnections in PMMA [DOI: 10.2961/jlmn.2018.03.0003]
|
|
|
Gian-Luca Roth, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum;
Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
|
|
|
(pp.155
-
159)
Received: June 23, 2018,
Accepted: October 7, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Laser Induced Periodic Surface Structures on 100Cr6 Steel for Modification of Friction Demonstrated with Stribeck Test [DOI: 10.2961/jlmn.2018.03.0004]
|
|
|
Stefan Rung, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Kevin Bokan, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Kevin Rutsch, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum;
Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
|
|
|
(pp.160
-
165)
Received: June 24, 2018,
Accepted: October 7, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Towards a Numerical Model of Picosecond Laser-Material Interaction in Bulk Sapphire [DOI: 10.2961/jlmn.2018.03.0005]
|
|
|
L. Capuano, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3) Faculty of Engineering Technology, University of Twente ;
D. de Zeeuw , Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3) Faculty of Engineering Technology, University of Twente ;
G.R.B.E. Römer, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3) Faculty of Engineering Technology, University of Twente ;
|
|
|
(pp.166
-
177)
Received: June 26, 2018,
Accepted: October 7, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Short and Ultrashort Pulsed Laser Processing of Zinc: Resolidification Morphology of Ablated Craters [DOI: 10.2961/jlmn.2018.03.0006]
|
|
|
H. Mustafa, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ;
M. Jalaal, Physics of Fluids Group and Max Planck Center Twente, MESA+ Institute and J. M. Burgers Centre for Fluid Dynamics, Faculty of Science and Technology, University of Twente ;
W. Ya, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ;
N. Ur Rahman, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ;
D.T.A. Matthews, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ;
G.R.B.E. Romer, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ;
|
|
|
(pp.178
-
188)
Received: June 26, 2018,
Accepted: October 7, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Laser-Induced Ejection of Millimeter-Sized Liquid Droplet from Metal Surface with a 1 Joule/Pulse ns-Laser [DOI: 10.2961/jlmn.2018.03.0007]
|
|
|
Hiroyuki Niino, National Institute of Advanced Industrial Science and Technology (AIST);
Yoshinori Kato, Industrial Development Center, Hamamatsu Photonics K. K.;
Takashi Kurita, Industrial Development Center, Hamamatsu Photonics K. K.;
Toshiyuki Kawashima, Industrial Development Center, Hamamatsu Photonics K. K.;
|
|
|
(pp.189
-
192)
Received: July 6, 2018,
Accepted: October 7, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Fluid Cells Fabrication in Sol-Gel and Porous Glass [DOI: 10.2961/jlmn.2018.03.0008]
|
|
|
Yaroslava M. Andreeva, ITMO University;
Maksim M. Sergeev, ITMO University;
Roman A. Zakoldaev, ITMO University;
Uliana E. Gabysheva, ITMO University;
Vadim P. Veiko, ITMO University;
Evgeniy B. Yakovlev, ITMO University;
Sergey I. Kudryashov, ITMO University;
Pavel A. Danilov, Lebedev Physical Institute;
Andrey A. Ionin, Lebedev Physical Institute;
Francis Vocanson, 3Hubert Curien Laboratory, UMR CNRS 5516/UJM/University of Lyon;
Tatiana E. Itina, ITMO University; Tatiana V. Antropova, Grebenshchikov Institute of Silicate Chemistry, Russian Academy of Sciences ; Oleg S. Medvedev, 5St.-Petersburg State University, Research Park, IRC for Nanotechnology;
|
|
|
(pp.193
-
197)
Received: July 12, 2018,
Accepted: October 7, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Effect of Corner Angle on Laser Scribing Width and Depth of Al2O3 Ce-ramics: Experiment and Numerical Simulation [DOI: 10.2961/jlmn.2018.03.0009]
|
|
|
Kaijin Huang, Key Laboratory of Advanced Manufacturing Technology, Ministry of Education, Guizhou University;
Shu Wang , State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology;
Xin Lin, State Key Laboratory of Solidification Processing, Northwestern Polytechnic University;
Xian Chen , Zhejiang Provincial Key Laboratory of Laser Processing Robit/ Key Laboratory of Laser Precision Processing & Detection, Wenzhou University;
Haisong Huang, Key Laboratory of Advanced Manufacturing Technology, Ministry of Education, Guizhou University;
Shihao Tang, Key Laboratory of Advanced Manufacturing Technology, Ministry of Education, Guizhou University;
Feilong Du, Key Laboratory of Advanced Manufacturing Technology, Ministry of Education, Guizhou University;
|
|
|
(pp.198
-
205)
Received: May 23, 2018,
Accepted: October 9, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Controlling Micron and Submicron Scale Laser Induced Surface Structures on Stainless Steel with Industrial Femtosecond Lasers [DOI: 10.2961/jlmn.2018.03.0010]
|
|
|
Fotis Fraggelakis, ALPhANOV, Technological Centre for Optics and Lasers, Optics Institute of Aquitaine;
Girolamo Mincuzzi, ALPhANOV, Technological Centre for Optics and Lasers, Optics Institute of Aquitaine;
John Lopez, ALPhANOV, Technological Centre for Optics and Lasers, Optics Institute of Aquitaine;
Rainer Kling, ALPhANOV, Technological Centre for Optics and Lasers, Optics Institute of Aquitaine;
Inka Manek-Hönninger, Université de Bordeaux, CNRS;
|
|
|
(pp.206
-
210)
Received: June 16, 2018,
Accepted: October 13, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Laser-induced Microplasma as Effective Tool for Phase Elements Fabrication on Amorphous and Crystalline Materials [DOI: 10.2961/jlmn.2018.03.0011]
|
|
|
Victoria Shkuratova, ITMO University;
Vladimir Rymkevich, ITMO University;
Galina Kostyuk, ITMO University;
Maksim Sergeev, ITMO University;
|
|
|
(pp.211
-
215)
Received: June 29, 2018,
Accepted: October 13, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Pure Titanium Foil Hybrid Surface Modification Using Ultraviolet Laser Micromachining [DOI: 10.2961/jlmn.2018.03.0012]
|
|
|
Chih-Chung Yang, Instrument Technology Research Center, National Applied Research Laboratories;
Han-Chao Chang, Instrument Technology Research Center, National Applied Research Laboratories;
Yu-Chen Hsien, Instrument Technology Research Center, National Applied Research Laboratories;
Shih-Feng Tseng, Department of Mechanical Engineering, National Taipei University of Technology;
Keh-moh Lin, Department of Mechanical Engineering, Southern Taiwan University of Science and Technology;
Donyau Chiang, Instrument Technology Research Center, National Applied Research Laboratories;
Kuo-Cheng Huang, Instrument Technology Research Center, National Applied Research Laboratories;
Wen-Tse Hsiao, Instrument Technology Research Center, National Applied Research Laboratories;
|
|
|
(pp.216
-
222)
Received: June 29, 2018,
Accepted: October 13, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Vector Bessel Beams with Modified Field Distribution [DOI: 10.2961/jlmn.2018.03.0013]
|
|
|
Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Ada Gajauskaitė , Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Artūras Grabusovas, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
|
|
|
(pp.223
-
227)
Received: July 26, 2018,
Accepted: October 13, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Tayloring Surface Properties of Rare Earth Magnesium Alloy for Biomedical Application Induced by Laser Processing [DOI: 10.2961/jlmn.2018.03.0014]
|
|
|
Shilin Nie, School of Mechanical Engineering & Automation, Beihang University;
Guan Kai, Department Of Oncology, Center Of Excellence. Hefei BOE Hospital Co., Ltd.;
Haoran Yu, School of Biological Science & Medical Engineering, Beihang University;
Haifeng Liu, School of Biological Science & Medical Engineering, Beihang University;
Yingchun Guan, School of Mechanical Engineering & Automation, Beihang University;
|
|
|
(pp.228
-
233)
Received: June 25, 2018,
Accepted: October 21, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
Direct Laser Printing of Liver Cells on Porous Collagen Scaffolds [DOI: 10.2961/jlmn.2018.03.0015]
|
|
|
V. Leva, Department of Physics, National Technical University of Athens;
M. Chatzipetrou, Department of Physics, National Technical University of Athens;
L. Alexopoulos, Department of Mechanical Engineering, National Technical University of Athens;
D. S. Tzeranis, Department of Mechanical Engineering, National Technical University of Athens;
I. Zergioti, Department of Physics, National Technical University of Athens;
|
|
|
(pp.234
-
237)
Received: July 26, 2018,
Accepted: October 21, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
Cavitation Erosion Properties of Microscale Texture Surfaces Induced by Laser Processing Technique [DOI: 10.2961/jlmn.2018.03.0016]
|
|
|
Enlan Zhao, School of Mechanical & Electrical Engineering, Xuzhou University of Technology;
Haifeng Yang, School of Mechatronic Engineering, China University of Mining & Technology;
Bo Sun, School of Mechatronic Engineering, China University of Mining & Technology;
Haoxue Chen, School of Mechatronic Engineering, China University of Mining & Technology;
|
|
|
(pp.238
-
243)
Received: June 9, 2018,
Accepted: October 25, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
Optical Bessel-like Beams with Engineered Axial Phase and Intensity Dis-tribution[DOI: 10.2961/jlmn.2018.03.0017]
|
|
|
Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Alfonsas Juršėnas, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Ernestas Nacius, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
|
|
|
(pp.244
-
248)
Received: June 24, 2018,
Accepted: October 25, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
Laser Processing of Silicon Suboxide for the Fabrication of Multilevel Fused Silica Diffractive Phase Elements[DOI: 10.2961/jlmn.2018.03.0018]
|
|
|
Lukas Janos Richter, Laser-Laboratorium Göttingen e.V.;
Clemens M. Beckmann, Laser-Laboratorium Göttingen e.V.;
Jörg Meinertz, Laser-Laboratorium Göttingen e.V.;
Jürgen Ihlemann, Laser-Laboratorium Göttingen e.V.;
|
|
|
(pp.249
-
253)
Received: June 21, 2018,
Accepted: November 11, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19
|
|
Large Scale Ultrafast Laser Micro Texturing with Multi-Beams [DOI: 10.2961/jlmn.2018.03.0019]
|
|
|
S. Bruening , Schepers GmbH & Co. KG;
M. Jarczynski, Limo GmbH;
K. Du, Edgewave GmbH;
A. Gillner, Fraunhofer ILT;
|
|
|
(pp.254
-
262)
Received: June 22, 2018,
Accepted: November 11, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20
|
|
Calculating the Borehole Geometry Produced by Helical Drilling with Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2018.03.0020]
|
|
|
Alexander Kroschel, Robert Bosch GmbH;
Andreas Michalowski, Robert Bosch GmbH;
Franziska Bauer, Robert Bosch GmbH;
Thomas Graf , Universität Stuttgart, Institut für Strahlwerkzeuge (IFSW);
|
|
|
(pp.263
-
267)
Received: June 24, 2018,
Accepted: November 11, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21
|
|
Utilizing Fundamental Beam-Mode Shaping Technique for Top-Hat La-ser Intensities in Direct Laser Interference Patterning [DOI: 10.2961/jlmn.2018.03.0021]
|
|
|
Mikhael El-Khoury, Fraunhofer Institute für Werkstoff und Strahltechnik IWS;
Bogdan Voisiat, Institut für Fertigungstechnik, Technische Universitaet Dresden;
Tim Kunze, Fraunhofer Institute für Werkstoff und Strahltechnik IWS;
Andrés Fabián Lasagni, Fraunhofer Institute für Werkstoff und Strahltechnik IWS;
|
|
|
(pp.268
-
272)
Received: June 25, 2018,
Accepted: November 11, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22
|
|
Multi Pulse Pump-Probe Diagnostics for Development of Advanced Transparent Materials Processing [DOI: 10.2961/jlmn.2018.03.0022]
|
|
|
M. Jenne, TRUMPF Laser- und Systemtechnik GmbH;
F. Zimmermann, TRUMPF Laser- und Systemtechnik GmbH;
D. Flamm, TRUMPF Laser- und Systemtechnik GmbH;
D. Großmann, TRUMPF Laser- und Systemtechnik GmbH;
J. Kleiner, TRUMPF Laser- und Systemtechnik GmbH;
M. Kumkar, TRUMPF Laser- und Systemtechnik GmbH;
S. Nolte, Institute of Applied Physics, Friedrich-Schiller-University Jena;
|
|
|
(pp.273
-
279)
Received: July 16, 2018,
Accepted: November 11, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
23
|
|
Vector Beams with Parabolic and Elliptic Cross-Sections for Laser Mate-rial Processing Applications [DOI: 10.2961/jlmn.2018.03.0023]
|
|
|
Sergej Orlov, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies;
Vitalis Vosylius, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies;
Pavel Gotovski, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies;
Artūras Grabusovas, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies;
Justas Baltrukonis, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies;
Titas Gertus, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies;
|
|
|
(pp.280
-
286)
Received: July 26, 2018,
Accepted: November 11, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24
|
|
Influence of Climatic Changes on the Joint Strength of Laser Joined Plas-tic-Metal-Hybrids [DOI: 10.2961/jlmn.2018.03.0024]
|
|
|
Kira van der Straeten, Fraunhofer Institute for Laser Technology ILT;
Alexander Olowinsky, Fraunhofer Institute for Laser Technology ILT;
Arnold Gillner, Fraunhofer Institute for Laser Technology ILT;
|
|
|
(pp.287
-
291)
Received: June 20, 2018,
Accepted: November 18, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
25
|
|
Influence of Pulse Duration on High-Precision Manufacturing of 3D Geometries [DOI: 10.2961/jlmn.2018.03.0025]
|
|
|
Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Stefan Rung, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum;
Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
|
|
|
(pp.292
-
295)
Received: June 20, 2018,
Accepted: November 18, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
26
|
|
New Approach for Assembling Dissimilar Materials: Laser Technology [DOI: 10.2961/jlmn.2018.03.0026]
|
|
|
Anne Henrottin, Lasea, Laser Engineering Applications;
Jérôme Patars, Lasea, Laser Engineering Applications;
Jose Antonio Ramos-de-Campo, Lasea, Laser Engineering Applications;
|
|
|
(pp.296
-
300)
Received: July 24, 2018,
Accepted: November 18, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
27
|
|
On-line Interferometric Observation of Thermomechanically Induced Re-fractive Index Changes during Glass Welding by Ultra-short Laser Pulses [DOI: 10.2961/jlmn.2018.03.0027]
|
|
|
Kristian Cvecek, blz – Bayerisches Laserzentrum;
Johannes Heberle, Graduate School in Advanced Optical Technologies, Friedrich-Alexander-University of Erlangen-Nürnberg ;
Isamu Miyamoto, Graduate School in Advanced Optical Technologies, Friedrich-Alexander-University of Erlangen-Nürnberg ;
Michael Bergler , Institute of Photonic Technologies, Friedrich-Alexander-University of Erlangen-Nürnberg;
Dominique de Ligny, Institute of Glass and Ceramics, Friedrich-Alexander-University of Erlangen-Nürnberg;
Michael Schmidt, blz – Bayerisches Laserzentrum;
|
|
|
(pp.301
-
308)
Received: June 19, 2018,
Accepted: November 25, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
28
|
|
Biomimetic Anti-adhesive Surface Micro-structures of Electrosurgical Knife Fabricated by Fibre Laser [DOI: 10.2961/jlmn.2018.03.0028]
|
|
|
Chen Li, College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology;
Li-jun Yang, College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology;
Cheng-cheng Yan, College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology;
Wei Chen, College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology;
Guang-hua Cheng, State Key Laboratory of Transient Optics and Photonics, Xi¡Çan Institute of Optics and Precision Mechanics;
|
|
|
(pp.309
-
313)
Received: July 25, 2018,
Accepted: November 29, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
29
|
|
Damage-free Ablation Process for Back-contacted Silicon Heterojunction Solar Cells [DOI: 10.2961/jlmn.2018.03.0029]
|
|
|
Aryak Singh, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH;
Bugra Turan, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH;
Stefan Haas, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH;
Andreas Lambertz, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH;
Kaining Ding and Uwe Rau, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH;
Uwe Rau, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH;
|
|
|
(pp.314
-
323)
Received: July 27, 2018,
Accepted: November 29, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
30
|
|
Controllable Spatial Array of Bessel-like Beams with Independent Axial Intensity Distributions for Laser Microprocessing [DOI: 10.2961/jlmn.2018.03.0030]
|
|
|
Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Alfonsas Juršėnas, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Justas Baltrukonis , Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Vytautas Jukna, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
|
|
|
(pp.324
-
329)
Received: June 24, 2018,
Accepted: December 6, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
