|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.14, No.1 (April, 2019) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
Evaluation of Key Geometrical and Mechanical Properties for Remote Laser Welded AC-170PX Aluminium Joints [DOI: 10.2961/jlmn.2019.01.0001]
|
|
|
Abhishek Das, WMG, The University of Warwick;
Ian Butterworth, WMG, The University of Warwick;
Iain Masters, WMG, The University of Warwick;
David Williams, WMG, The University of Warwick;
|
|
|
(pp.1
-
7)
Received: April 22, 2018,
Accepted: December 27, 2018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Early Stage Material Motion and Transient Optical Properties of Metals after Ultrashort Laser Pulse Irradiation [DOI: 10.2961/jlmn.2019.01.0002]
|
|
|
Cormac McDonnell, Department of Applied Science and Mechatronics, Munich University of Applied Sciences;
Jan Winter, Department of Applied Science and Mechatronics, Munich University of Applied Sciences;
Stephan Rapp, Department of Applied Science and Mechatronics, Munich University of Applied Sciences;
Heinz Paul Huber, Department of Applied Science and Mechatronics, Munich University of Applied Sciences;
Michael Schmidt, Lehrstuhl für Photonische Technologien, Friedrich-Alexander-Universität Erlangen-Nürnberg;
|
|
|
(pp.8
-
12)
Received: July 19, 2018,
Accepted: January 5, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Positive Effect of Laser Structured Surfaces on Tribological Performance [DOI: 10.2961/jlmn.2019.01.0003]
|
|
|
Tobias Stark, Robert Bosch GmbH;
Sabri Alamri, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS;
Alfredo I. Aguilar-Morales, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS;
Thomas Kiedrowski, Robert Bosch GmbH;
Andrés Fabián Lasagni, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS;
|
|
|
(pp.13
-
18)
Received: July 24, 2018,
Accepted: January 5, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Fabrication of High Aspect Ratio Channels in Fused Silica Using Femto-second Pulses and Chemical Etching at Different Conditions [DOI: 10.2961/jlmn.2019.01.0004]
|
|
|
Simas Butkus, Laser Research Center, Faculty of Physics, Vilnius University;
Martynas Rickus, Laser Research Center, Faculty of Physics, Vilnius University;
Romualdas Sirutkaitis, Institute of Biochemistry, Vilnius University;
Domas Paipulas, Laser Research Center, Faculty of Physics, Vilnius University;
Valdas Sirutkaitis, Laser Research Center, Faculty of Physics, Vilnius University;
|
|
|
(pp.19
-
24)
Received: July 26, 2018,
Accepted: January 5, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Parabolic Vector Focus Wave Modes [DOI: 10.2961/jlmn.2019.01.0005]
|
|
|
Pavel Gotovski , Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
|
|
|
(pp.25
-
30)
Received: June 24, 2018,
Accepted: January 19, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Microfabrication of Au Film Using Optical Vortex Beam [DOI: 10.2961/jlmn.2019.01.0006]
|
|
|
Sho Kawagoe, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Ryosuke Nakamura, Graduate School of Engineering, Chiba University;
Ryohei Tasaki, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Hiroki Oshima, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Takashige Omatsu, Graduate School of Engineering, Chiba University;
|
|
|
(pp.31
-
34)
Received: July 26, 2019,
Accepted: January 19, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Laser Ablation and Seeding for the Preparation of Highly Transparent Copper Conductive Networks on Glass [DOI: 10.2961/jlmn.2019.01.0007]
|
|
|
Joel N. Schrauben, Electro Scientific Industries [DOI: 10.2961/jlmn.2019.01.0007];
|
|
|
(pp.35
-
42)
Received: September 26, 2018,
Accepted: January 27, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Ultrafast-Laser Manufacture of Radially Emitting Optical Fiber Diffusers for Medical Applications [DOI: 10.2961/jlmn.2019.01.0008]
|
|
|
Stephan Ströbl, Vorarlberg University of Applied Sciences;
Christoph Vonach, Vorarlberg University of Applied Sciences;
Johannes Gratt, Vorarlberg University of Applied Sciences;
Matthias Domke, Vorarlberg University of Applied Sciences;
Ronald Sroka, Laser-Forschungslabor, LIFE-Zentrum – Department of Urology, University Hospital Munich;
|
|
|
(pp.43
-
48)
Received: June 12, 2018,
Accepted: February 2, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
A New Approach to Seal Polymer Microfluidic Devices Using Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2019.01.0009]
|
|
|
Gian-Luca Roth, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum;
Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
|
|
|
(pp.49
-
53)
Received: June 23, 2018,
Accepted: February 2, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Fiber Laser Based Single Pulse Drilling for Production of Perforated Ti-tanium Sheets for HLFC Structures [DOI: 10.2961/jlmn.2019.01.0010]
|
|
|
Roberto Ocaña, Advanced Manufacturing Technologies Unit;
Carlos Soriano, Advanced Manufacturing Technologies Unit;
Jose I. Esmoris, Advanced Manufacturing Technologies Unit;
Rafael Sánchez, Technological Development Department,Aerometallic;
|
|
|
(pp.54
-
58)
Received: June 27, 2019,
Accepted: February 2, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Laser Processing High Aspect Ratio Groove Wick for Improving the Thermal Performance of Flat Micro Heat Pipe [DOI: 10.2961/jlmn.2019.01.0011]
|
|
|
X. Z. Xie, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology;
W. J. Hong, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology;
J.Y. Long, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology;
X. Wei, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology;
W. Hu, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology;
Q.L. Ren, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology;
|
|
|
(pp.59
-
65)
Received: June 23, 2018,
Accepted: February 17, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Investigation of Laser Processing of Biodegradable Nanofiber Nonwovens with Different Laser Pulse Durations [DOI: 10.2961/jlmn.2019.01.0012]
|
|
|
M. Götze, University of Applied Sciences Merseburg;
T. Kürbitz, University of Applied Sciences Anhalt;
O. Krimig, University of Applied Sciences Merseburg;
C.E.H. Schmelzer, Fraunhofer Institute for Microstructure of Materials and Systems IMWS;
A. Heilmann, University of Applied Sciences Anhalt;
G. Hillrichs, University of Applied Sciences Merseburg;
|
|
|
(pp.66
-
73)
Received: June 24, 2018,
Accepted: February 17, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Vector Focus Wave Modes with Elliptic Cross-Section [DOI: 10.2961/jlmn.2019.01.0013]
|
|
|
Vitalis Vosylius, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
|
|
|
(pp.74
-
79)
Received: June 24, 2018,
Accepted: February 23, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Multimaterial Manufacture Through Combining Optical Tweezers with Multiphoton Fabrication [DOI: 10.2961/jlmn.2019.01.0014]
|
|
|
M. Askari, Faculty of Engineering, The University of Nottingham, University Park;
C. J. Tuck, Faculty of Engineering, The University of Nottingham, University Park;
Q. Hu, Faculty of Engineering, The University of Nottingham, University Park;
R. J. M. Hague , Faculty of Engineering, The University of Nottingham, University Park;
R. D. Wildman, Faculty of Engineering, The University of Nottingham, University Park;
|
|
|
(pp.80
-
87)
Received: June 26, 2018,
Accepted: February 23, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
In-Situ Analysis of Ultrashort Pulsed Laser Ablation with Pulse Bursts [DOI: 10.2961/jlmn.2019.01.0015]
|
|
|
Benedikt Bornschlegel, Chair for Laser Technology, RWTH Aachen University;
Johannes Finger, Chair for Laser Technology, RWTH Aachen University;
|
|
|
(pp.88
-
94)
Received: June 24, 2018,
Accepted: March 3, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
High-Efficiency Sub-Micrometer Multi-Beam Interference Structuring for Large-Scale Surface Using Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2019.01.0016]
|
|
|
Chao He, Chair for Laser Technology LLT, RWTH Aachen University;
Kai Vannahme, Fraunhofer Institute for Laser Technology ILT;
Arnold Gillner, Chair for Laser Technology LLT, RWTH Aachen University;
|
|
|
(pp.95
-
99)
Received: June 27, 2018,
Accepted: March 6, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
Increasing Productivity of Ultrashort Pulsed Laser Ablation in Advance for a Combination Process with ns-laser [DOI: 10.2961/jlmn.2019.01.0017]
|
|
|
Andreas Brenner, Fraunhofer Institute for Laser Technology;
Benedikt Bornschlegel, Chair for Laser Technology LLT, RWTH Aachen University;
Johannes Finger, Fraunhofer Institute for Laser Technology;
|
|
|
(pp.100
-
107)
Received: July 25, 2018,
Accepted: March 31, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
Picosecond Pulsed Laser Ablation of Liquid Covered Stainless Steel: Ef-fect of Liquid Layer Thickness on Ablation Efficiency [DOI: 10.2961/jlmn.2019.01.0018]
|
|
|
Sietse van der Linden, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS³), Faculty of Engineering Technology, University of Twente;
Rob Hagmeijer, Chair of Engineering Fluid Dynamics, Department of Thermal and Fluid Engineering, Faculty of Engineering Technology, University of Twente;
Gert-willem Römer, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS³), Faculty of Engineering Technology, University of Twente;
|
|
|
(pp.108
-
119)
Received: June 24, 2018,
Accepted: April 3, 2019
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
