|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.15, No.2 (September, 2020) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
(Invited Paper) Advances of Laser Welding Technology of Glass
-Science and Technology-
[DOI: 10.2961/jlmn.2020.02.1001]
|
|
|
Isamu Miyamoto, Osaka University, Department of Manufacturing science;
Kristian Cvecek, Erlangen Graduate School of Advanced Optical Technologies;
Michael Schmidt, Erlangen Graduate School of Advanced Optical Technologies;
|
|
|
(pp.63
-
76)
Received: March 8, 2020,
Accepted: August 29, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Selective Area Nd:YAG Laser Functionalization of Digital
Photocorrosion GaAs/AlGaAs Biosensor
[DOI: 10.2961/jlmn.2020.02.2001]
|
|
|
Hakim Grib, Laboratory of Quantum Semiconductor and Photon-based BioNanotechnology, Department of Electrical and Computer Engineering, Interdisciplinary Institute for Technological Innovation (3IT), Université de Sherbrooke;
Khalid Moumanis, Laboratory of Quantum Semiconductor and Photon-based BioNanotechnology, Department of Electrical and Computer Engineering, Interdisciplinary Institute for Technological Innovation (3IT), Université de Sherbrooke;
Walid Mohamed Hassen, Laboratory of Quantum Semiconductor and Photon-based BioNanotechnology, Department of Electrical and Computer Engineering, Interdisciplinary Institute for Technological Innovation (3IT), Université de Sherbrooke;
Jan J. Dubowski, Laboratory of Quantum Semiconductor and Photon-based BioNanotechnology, Department of Electrical and Computer Engineering, Interdisciplinary Institute for Technological Innovation (3IT), Université de Sherbrooke;
|
|
|
(pp.77
-
84)
Received: February 17, 2020,
Accepted: July 26, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Design an Asymmetrical Three-Beam Laser Interference Lithography for Fabricating Micro- and Nano-Structures
[DOI: 10.2961/jlmn.2020.02.2002]
|
|
|
Litong Dong, International Research Centre for Nano Handling and Manufacturing of China, Changchun University of Science and Technology;
Ziang Zhang, Changchun Observatory, National Astronomical Observatories, CAS;
Zuobin Wang, International Research Centre for Nano Handling and Manufacturing of China, Changchun Uni-versity of Science and Technology;
Dayou Li, IRAC & JR3CN, University of Bedfordshire;
Mengnan Liu, International Research Centre for Nano Handling and Manufacturing of China, Changchun University of Science and Technology;
|
|
|
(pp.85
-
91)
Received: May 29, 2020,
Accepted: July 27, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Laser Direct Writing of Conductive Carbon Microelectrodes and Micro-Supercapacitor Applications
[DOI: 10.2961/jlmn.2020.02.2003]
|
|
|
Akira Watanabe, Institute of Multidisciplinary Research for Advanced Materials, Tohoku University;
Jinguang Cai, Institute of Materials, China Academy of Engineering Physics;
|
|
|
(pp.92
-
96)
Received: May 21, 2019,
Accepted: July 28, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Comparison of Structural Colors Achieved by Laser-Induced Periodic Surface Structures and Direct Laser Interference
Patterning
[DOI: 10.2961/jlmn.2020.02.2004]
|
|
|
Marcos Soldera, Institut für Fertigungstechnik, Technische Universität Dresden;
Franco Fortuna, Institut für Fertigungstechnik, Technische Universität Dresden;
Sascha Teutoburg-Weiss, Institut für Fertigungstechnik, Technische Universität Dresden;
Stephan Milles, Institut für Fertigungstechnik, Technische Universität Dresden;
Kurt Taretto, PROBIEN, Dto. de Electrotecnia, CONICET, Univ. Nacional del Comahue;
Andrés Fabián Lasagni, Institut für Fertigungstechnik, Technische Universität Dresden;
|
|
|
(pp.97
-
103)
Received: June 4, 2020,
Accepted: July 28, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Fabrication of Breathable Film Using Diffractive Multi-beam
Nanosecond Laser Patterning of Polypropylene Film
[DOI: 10.2961/jlmn.2020.02.2005]
|
|
|
Dongyoon Yoo, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST);
Hun-Kook Choi, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST);
Jae Hee Sung, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST);
Ik-Bu Sohn, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST);
Jongyeol Kim, Korea Atomic Energy Research Institute (KAERI);
Young-Han Kim, Daerung Packaging Industry;
Md. Shamim Ahsan, Electronics and Communication Engineering Discipline, Science Engineering and Technology School, Khulna University;
|
|
|
(pp.104
-
110)
Received: June 17, 2020,
Accepted: July 26, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Formation of Fine Periodic Structures on Back Surface of Si
Substrate by a Femtosecond Laser at 1552 nm
[DOI: 10.2961/jlmn.2020.02.2006]
|
|
|
Yoshiro Ito, Department of Mechanical Engineering, Nagaoka University Technology;
Sin Ying Chiah, Department of Mechanical Engineering, Nagaoka University Technology;
Khanh Phu Luong, Department of Mechanical Engineering, Nagaoka University Technology;
Daiki Kataoka, Department of Mechanical Engineering, Nagaoka University Technology;
Rie Tanabe-Yamagishi, Department of Mechanical Engineering, Nagaoka University Technology;
|
|
|
(pp.111
-
117)
Received: April 8, 2020,
Accepted: July 27, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Generation of Rotationally Symmetric Micro Tools using
Ultrashort Laser Pulses
[DOI: 10.2961/jlmn.2020.02.2007]
|
|
|
Julian Zettl, University of Applied Sciences Aschaffenburg, Applied Laser and Photonics Group;
Maximilian Klar, University of Applied Sciences Aschaffenburg, Applied Laser and Photonics Group;
Cemal Esen, Ruhr University Bochum, Applied Laser Technologies;
Ralf Hellmann, University of Applied Sciences Aschaffenburg, Applied Laser and Photonics Group;
|
|
|
(pp.118
-
122)
Received: June 26, 2020,
Accepted: August 25, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Processing of Functional Texturing on Micro-fibers
by Laser-induced Micro/Nanoscale Surface Topographies
[DOI: 10.2961/jlmn.2020.02.2008]
|
|
|
Masaki Ysmaguchi, Graduate School of Medicine, Science & Technology, Shinshu University;
Ryosuke Kase, Graduate School of Medicine, Science & Technology, Shinshu University;
Hidenori Shimada, Graduate School of Medicine, Science & Technology, Shinshu University;
|
|
|
(pp.123
-
127)
Received: April 21, 2020,
Accepted: August 26, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Pulse-by-Pulse Optical Observation of Growth of
Laser-Induced Periodic Surface Structure
at Oblique Incidence
[DOI: 10.2961/jlmn.2020.02.2009]
|
|
|
Kyosuke Shibata , Department of Mechanical Engineering, Shibaura Institute of Technology;
Shigeki Matsuo, Department of Mechanical Engineering, Shibaura Institute of Technology;
|
|
|
(pp.128
-
131)
Received: July 17, 2020,
Accepted: September 3, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Laser Structuring of Open Cell Metal Foams for Micro Scale Surface Enlargement
[DOI: 10.2961/jlmn.2020.02.2010]
|
|
|
Robert Baumann, Institute for Manufacturing Technology, Technische Universität Dresden;
Thomas Rauscher, Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Branch Lab;
Christian Immanuel Bernäcker, Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Branch Lab;
Christoph Zwahr, Institute for Manufacturing Technology, Technische Universität Dresden;
Thomas Werißgärber, Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Branch Lab;
Lars Röntzsch, Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Branch Lab;
Andrés Fabián Lasagni, Institute for Manufacturing Technology, Technische Universität Dresden;
|
|
|
(pp.132
-
138)
Received: June 10, 2020,
Accepted: September 7, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
In-Situ Pulsed Laser Interference Nanostructuring of Semiconductor Sur-faces
[DOI: 10.2961/jlmn.2020.02.2011]
|
|
|
Yun-Ran Wang, Department of Electronic and Electrical Engineering, University of Sheffield;
Im Sik Han, Department of Electronic and Electrical Engineering, University of Sheffield;
Chao-Yuan Jin, Department of Electronic and Electrical Engineering, University of Sheffield;
Mark Hopkinson, Department of Electronic and Electrical Engineering, University of Sheffield;
|
|
|
(pp.139
-
142)
Received: July 13, 2020,
Accepted: September 7, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Printing Method for Long Flight Distance by Laser-Induced Forward Transfer
[DOI: 10.2961/jlmn.2020.02.2012]
|
|
|
Hiroyuki Suhara, Innovation/R&D Division, RICOH COMPANY, LTD;
Jun Aoto , Innovation/R&D Division, RICOH COMPANY, LTD;
Muneaki Iwata, Innovation/R&D Division, RICOH COMPANY, LTD;
|
|
|
(pp.143
-
149)
Received: June 5, 2020,
Accepted: September 15, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Monitoring the Heat Accumulation during Fabrication of Surface Micropatterns
on Metallic Surfaces Using Direct Laser Interference Patterning
[DOI: 10.2961/jlmn.2020.02.2013]
|
|
|
Nikolai Schröder, Technische Universität Dresden, Institut für Fertigungstechnik;
Germán Vergara, New Infrared Technologies;
Bogdan Voisat, Technische Universität Dresden, Institut für Fertigungstechnik;
Andrés Fabián Lasagni, Technische Universität Dresden, Institut für Fertigungstechnik;
|
|
|
(pp.150
-
157)
Received: June 19, 2020,
Accepted: September 15, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
Recast-Free Helical Drilling of Fused Silica Using SHG Picosecond Laser Pulses
[DOI: 10.2961/jlmn.2020.02.2014]
|
|
|
Chao He, RWTH Aachen University, Chair for Laser Technology LLT;
Malte Weber, Fraunhofer Institute for Laser Technology ILT;
Arnold Gillner, RWTH Aachen University, Chair for Laser Technology LLT;
|
|
|
(pp.158
-
163)
Received: July 17, 2020,
Accepted: September 15, 2020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
